Statistical Plotting In A Program; Defining The Viewing Window; Tracing A Stat Plot - Texas Instruments TI-84 Plus Manual Book

Defining the Viewing Window

Defining the Viewing Window Defining the Viewing Window Defining the Viewing Window
Stat plots are displayed on the current graph. To define the viewing window, press
p and enter values for the window variables.
window to display all statistical data points.

Tracing a Stat Plot

Tracing a Stat Plot Tracing a Stat Plot Tracing a Stat Plot
When you trace a scatter plot or xyLine, tracing begins at the first element in the lists.
When you trace a histogram, the cursor moves from the top center of one column to the
top center of the next, starting at the first column.
When you trace a box plot, tracing begins at
. Press ~ to trace to
and
minX
When you press } or † to move to another plot or to another Y= function, tracing
moves to the current or beginning point on that plot (not the nearest pixel).
The /
ExprOn ExprOff
selected, the plot number and plotted data lists are displayed in the top-left corner.

Statistical Plotting in a Program

Statistical Plotting in a Program Statistical Plotting in a Program Statistical Plotting in a Program
Defining a Stat Plot in a Program Defining a Stat Plot in a Program
Defining a Stat Plot in a Program Defining a Stat Plot in a Program
To display a stat plot from a program, define the plot, and then display the graph.
Chapter 12: Statistics
and
Q3
format setting applies to stat plots (Chapter 3). When
ZoomStat
(the median). Press | to trace to
Med
.
maxX
redefines the viewing
ExprOn
Q1
is
326