Texas Instruments TI-84 Plus Manual Book page 217

If stat plots are turned on, the plots are shown along with the x-y plots in graphs. Press
y 0 to make the table portion of the split screen active and to display the list data.
Press † or } to highlight a value you want to edit, and then enter a new value directly in
the table to overwrite the previous value. Press ~ repeatedly to display each column of
data (both table and list data).
Split-screen display with both x-y plots and stat plots
Some screens are never displayed as split screens. For example, if you press z in
or mode, the mode screen is displayed as a full screen. If you then press a key
Horiz G-T
that displays either half of a split screen, such as r, the split screen returns.
When you press a key or key combination in either or mode, the cursor is
Horiz G-T
placed in the half of the display for which that key applies. For example, if you press
r, the cursor is placed in the half in which the graph is displayed. If you press
y 0, the cursor is placed in the half in which the table is displayed.
The TI-84 Plus will remain in split-screen mode until you change back to screen
Full
mode.
Chapter 9: Split Screen 214