Snapper SXDST82 Owner's Manual page 48

OPERATION
TO INSTALL/REMOVE BATTERY PACK (
TO INSTALL
• Align the ribs of the battery pack with the mounting slots in the blower's battery port.
• Insert the battery into the battery opening until the battery release button locks into place.
TO REMOVE
• Press the battery release button on the blower. This will cause the battery to slightly protrude
out of the tool.
• Grasp the blower firmly and pull the battery out of the handle.
W A R N I N G
Always take care of your feet, children, or pets around you when pressing the battery release
button. Serious injury could result if the battery pack falls. NEVER remove the battery pack when in
a high location.
CHARGE BEFORE FIRST USE
W A R N I N G
Always remove battery pack from the product when you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery pack will prevent accidental starting that could
cause serious personal injury.
Battery release
button
)
See Figure 3.
12
Fig. 3