Snapper SXDST82 Owner's Manual page 16

OPERATION
sTARTINg AND sTOPPINg THE TRImmER (See Figure 7.)
To start:
• Press the power button.
• Depress the lock-out button and squeeze the switch trigger.
• Press high speed button to increase speed depending upon grass condition. Two LED's will
illuminate above the high speed button indicating that the trimmer is in the high speed setting.
To stop:
• Release the switch trigger.
• Press the power button again to turn the unit off.
Note: The unit will power itself down after being idle for 1 minute.
On/Off button
Hight/Low speed button
Switch trigger
Lock-out button
Fig. 7
16