Snapper SXDST82 Owner's Manual page 46

ASSEMBLY
ASSEMBLING THE BLOWER TUBE(
)
See Figure 2.
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. Align either of the grooves on the tube with the tabs on the blower housing. Push the tube onto
( )
the blower housing until the tab engages the grooves
See Figure 2.1.
Tube
Tab
Groove
Fig. 2.1
2. Turn the tube in the direction of the arrow until both of the tabs slide into the lock positions. (
See
)
Figure 2.2.
Unlock Lock
Fig. 2.2
Lock position
10