HAMPTON BAY SINCLAIR AL958-TB Use And Care Manual page 11

Assembly — Hanging the Fan (continued)
7
Installing the canopy
WARNING:
Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (D) before
attaching the canopy (B) to the mounting bracket (A) by
turning the canopy housing until it drops into place.
□
Tuck the connections neatly into the ceiling outlet
box.
□
Slide the canopy (B) up to the mounting bracket (A)
and place the key hole on the canopy (B) over the
loose canopy mounting bracket screw (EE) on the
mounting bracket (A). Turn the canopy (B) clockwise
until the canopy (B) locks in place at the narrow
section of the key holes.
□
Align the circular hole on the canopy (B) with the
remaining hole on the mounting bracket (A). Secure
the canopy mounting bracket screw (EE) previously
removed in the hole and tighten the two canopy
mounting bracket screws (EE).
EE
C
8
□
A
B
EE
11
Attaching the canopy
bottom cover
Attach the canopy bottom cover (C) to the canopy
mounting screw heads on the bottom of the canopy
(B) by inserting the screw heads into the key slots in
the canopy bottom cover (C) and rotating the canopy
bottom cover (C) clockwise.
NOTE: Adjust the canopy mounting bracket screws (EE) as
necessary until the canopy (B) and canopy bottom cover (C)
are snug.
B
EE
Please contact 1-877-527-0313 for further assistance.
C
HAMPTONBAY.COM