Advertisement
Table of Contents
1
6
7
Secure linkage in vice and tighten bolts. Do not
Torque. Allow steel bracket to rotate freely.
1
Remove Fender Brace with 10mm socket or
wrench.
3
TECH SUPPORT 1-888-983-2204 Monday - Friday, 6:00 AM - 5:00 PM PST
Designed and manufactured by AMP Research. Patent 6,830,257 / 6,641,158 / 6,834,875 / 6,938,909 / 6,942,233 / 7,007,961 / 7,055,839 / 7,163,221
Other US and worldwide patents pending. Three-year limited warranty. "BEDSTEP" is a trademark of AMP Research.
www.amp-research.com
2
9
8
13 mm
APPLICATION
Toyota Tundra
4
3
10
2
15 mm
Install mounting bracket using factory fasteners.
Torque fasteners to 90ft-lbs/125Nm.
4
10 mm
1/3
aMp part # 75316-01a
2016
5
Torque wrench
11
15mm 19mm
10mm 13mm
IM75316 rev 03.18.16
T25
19 mm
19 mm
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AMP Research BedStep 75316-01A
Summary of Contents for AMP Research BedStep 75316-01A
- Page 1 TECH SUPPORT 1-888-983-2204 Monday - Friday, 6:00 AM - 5:00 PM PST Designed and manufactured by AMP Research. Patent 6,830,257 / 6,641,158 / 6,834,875 / 6,938,909 / 6,942,233 / 7,007,961 / 7,055,839 / 7,163,221 Other US and worldwide patents pending. Three-year limited warranty. “BEDSTEP” is a trademark of AMP Research.
- Page 2 Remove harness retainer clip from hole and use Reattach harness to bracket. one bolt from step 3. Use supplied M6 nut and tighten to 12ft-lbs. 10 mm Attach fender support bracket to main bracket as Attach rear support bracket to bed panel and shown.
- Page 3 LIMI T ED WARRANTY AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item found by the factory to be defective within the time period specified.
Need help?
Do you have a question about the BedStep 75316-01A and is the answer not in the manual?
Questions and answers