Oriental motor SPR II Series Operating Manual

SPRⅡ
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures.
・Please read this Operating Manual and the separate manual entitled "BEFORE USING THE PRODUCT" thoroughly to
ensure safe operation.
・Always keep the manual where it is readily available.
Series Slides

Table of contents

1 Introduction .................................................2
1.1 Compliance with the EC Directives....................2
1.2 Names of parts ...................................................3
2 Installation ...................................................4
2.1 Changing the motor cable's routing direction
(SPR6, SPR8 only) ..............................................4
2.2 Motorized linear slides installation .....................6
2.3 Installing a frame cover ......................................6
2.4 Installing a load ..................................................7
2.5 Installing the sensor and sensor cable holder....8
3 Connection ................................................ 11
3.1 Confirmation of controller key designation.......11
3.2 Connection of motor cable ...............................11
4 Inspection..................................................12
4.1 Inspection items and timing .............................12
4.2 External check and cleaning ............................12
4.3 Internal check/cleaning and greasing ..............13
HL-17013