Maintenance - Chicco one4ever Manual

child at a time.
• Do not use accessories, replacement
parts, or any component not supplied
or approved by the manufacturer /
distributor.
• Do not use this product if any part
is broken, torn or missing.
• With the car seat installed on the
stroller, this is not a replacement for
a crib or bed, if the child needs to
sleep he or she should be placed in
a carry cot, crib or bed.
• Before assembling, ensure that the
product and its components have
not been damaged during trans-
portation. In this case, do not use
and keep out of reach of children.
• During adjustment operations, en-
sure that the moving parts of the
stroller do not come into contact
with your child.
• Make sure that the person using
the stroller knows how to operate
it in the safest way.
• This product must only be used by
an adult.
• The product must only be assem-
bled by an adult.
• To avoid all strangulation hazards,
never give children objects with
cords or strings attached, or leave
them close to such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
lose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller is left exposed to di-
rect sunlight for an extended pe-
riod of time, allow it to cool down
before placing your child inside.
Prolonged exposure to direct sun-
light may cause the colour of the
materials and fabric to fade.
• Prevent the stroller from coming
into contact with salt water. It may
cause rusting.
• Do not use the stroller on the beach.
• WARNING: never use the bumper
bar to lift the stroller with the child
inside.
• When not in use, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance. Cleaning and main-
tenance should only be carried out by an adult.
CLEANING
The stroller is equipped with two seat units: Seat unit 1 (Fig. A), Seat
unit 2 (Fig.B). The lining can be completely removed from either seat
(see the chapter on "Fitting/removing the seat lining"). Please refer
to the care labels for instructions on how to clean the fabric parts.
The washing symbols and relative meanings are indicated below:
Hand wash
Do not bleach
30° C
Do not tumble dry
Do not iron
Do not dry clean
Routinely wipe clean plastic parts with a soft damp cloth. Never use
solvents or abrasive products. To prevent the formation of rust, always
dry metal parts if they have come into contact with water.

MAINTENANCE

Regularly check the condition of the wheels and clean off all dust
and sand. To avoid friction that may compromise the correct func-
tioning of the stroller, make sure that all plastic parts are clean of
dust, dirt and sand. Keep the stroller in a dry place. If necessary, lu-
bricate the moving parts with dry silicone lubricant.
Check that none of the components of this model are missing be-
fore assembling the product. If any part is missing, contact Chicco
Customer Service. No tools are needed to assemble this product.
Important Note: the pictures and instructions contained in this
booklet refer to a specific version of the stroller. Some of the com-
ponents and functions described here may vary depending on the
model purchased.
ASSEMBLING THE STROLLER
WARNING: When opening or closing the stroller, make sure that
your child or other children are at a safe distance. Make sure that
during these operations the moving parts of the stroller do not
come into contact with your child.
1. The stroller is delivered closed (Fig.1). Release the closing device,
push the front part of the stroller forward and, at the same time,
pull up on the handle until you hear a click informing you that the
stroller is completely open (Fig. 1A-1B).
2. Fit the front wheel into the appropriate hole until you hear a lock-
ing click (Fig. 2). Repeat the same operation for the second front
wheel.
18