Suunto T3C User Manual page 21

Setting Value
lower bpm / %
upper bpm / %
alarm on / off
To change
HR LIMITS
1. Enter the menu (
2. Enter the setting with [Mode] and set the value using [Lap +] and [Light -].
3. Accept the value and move to the next setting by pressing [Mode].
4. Repeat steps 2 and 3 as needed.
5. Press [Start Stop] to exit.
NOTE: The heart rate limits are displayed with dashes on the left outer rim of the display
if the limits are activated.
Possible real life situation: Staying in the zone
You want to have a good, tough training session today, so you set your heart rate limits to
equal your Zone 3 limits and turn the heart rate limit alarm on. Your Suunto heart rate
monitor notifies you when you go too slow, or push too hard!
20
Description
Lower heart rate limit: according to selected units
in
GENERAL
Upper heart rate limit according to selected units
in
GENERAL
Outside the limit alarm: on or off
settings:
) and scroll with [Lap +] until you reach
SET
settings
settings
.
HR LIMITS