Table of Contents
Advertisement
Clean the windows inside and outside with a
R
damp cloth and with a cleaning agent recom-
mended for Mercedes-Benz.
Do not use dry cloths or abrasive or solvent-
R
based cleaning agents to clean the insides of
windows.
%
After changing the wiper blades or treating
the vehicle with wax, clean the windshield
thoroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure to observe the
application instructions may result in damage,
smear marks or glare spots.
%
Remove external fogging or dirt on the wind-
shield in front of the multifunction camera.
Otherwise, driving systems and driving safety
systems may be impaired or unavailable
(
page 159).
/
Wiper blades
Fold out the wiper blades and clean them
R
using a damp cloth.
Fold the wiper arm away from the rear window
R
(
page 115).
/
%
Make sure that the wiper blades are coated.
The coating may leave residue on a cloth. Do
not rub the wiper blades excessively or clean
them too often.
Exterior lighting
Clean the lenses with a wet sponge and mild
R
cleaning agent (e.g. car shampoo).
Use only cleaning agents or cleaning cloths
R
that are suitable for plastic lenses.
Sensors
Clean the sensors in the front and rear bump-
R
ers with a soft cloth and car shampoo
(
page 159).
/
When using a power washer, maintain a mini-
R
mum distance of 11.8 in (30 cm).
Running boards
Use water and acid-free cleaning agents.
R
Do not clean the aluminum trim inserts of the
R
running board with alkaline or acidic cleaning
agents such as wheel cleaners. Do not use
acidic alloy wheel cleaners to remove brake
dust. The aluminum trim inserts could other-
wise be damaged.
Maintenance and care 327
Reversing camera and 360° Camera
Open the camera cover with the multimedia
R
system (
page 187).
/
Use clean water and a soft cloth to clean the
R
camera lens.
Do not use a power washer.
R
Trailer hitch
Observe the notes on care in the trailer hitch
R
manufacturer's operating instructions.
Do not clean the ball neck with a power
R
washer or solvent.
Remove traces of rust on the ball (e.g. using a
R
wire brush).
Remove dirt with a lint-free cloth.
R
After cleaning, lightly oil or grease the ball
R
head.
%
Before using trailers with anti-torsional cou-
pling, observe the manufacturer's operating
instructions.
Advertisement
Table of Contents
