Mercedes-Benz G-Class 2023 Operator's Manual page 141

Selecting the drive program
Push DYNAMIC SELECT switch 1
#
backwards.
The selected drive program appears in the
Instrument Display and media display.
Selecting the drive program ë (Desert)
Switch to drive program ;.
#
Press and hold DYNAMIC SELECT switch
#
rearwards for approx. three seconds.
A message is shown in the Instrument Display
and a warning tone sounds.
Drive program ë is selected.
Confirm the message with the left touchpad
#
on the steering wheel.
The Desert Drive Program Act. ESP Unavaila-
ble See Operator's Manual
in the Instrument Display. The ESP
warning lamps light up.
%
A message appears again and a warning tone
sounds when the driver's door is opened and
the vehicle has been started to draw attention
to restricted road suitability in case of a
change of drivers.
forwards or
Press DYNAMIC SELECT switch
#
to deactivate drive program ë.
%
Drive program A is automatically active
after starting the vehicle.
1 Configuring drive program I
Multimedia system:
Vehicle
4
Individual
5
Select the individual setting.
#
Switching the operation feedback for drive pro-
message appears grams on or off
®
and ABS
Multimedia system:
Vehicle
4
Switch Notification for User
#
When this function is active, a corresponding
message is shown in the media display when a
drive program is selected with the DYNAMIC
SELECT switch.
1
forwards
Driving and parking 139
e DYNAMIC SELECT
5
e DYNAMIC SELECT
5
on O or off ª.