System Status Led; Cpu_Vrm Overheat Leds - Supermicro X7DCL-3 User Manual

System Status LED (LED4)
A Status LED Indicator is located at
LED4 on the motherboard. This LED dis-
plays different colors to show the status
of the system. Refer to the table on the
right for system status. See the layout
below for the LED location.
CPU_VRM Overheating LED
Indicators (LED5/LED6)
Two CPU_VRM Overheat LEDs are locat-
ed at LED5 and LED6 on the motherboard.
These LEDs provide indications for
CPU_VRM Overheating. Refer to the
table on the right for LED5 and LED6
settings. See the layout below for the
LED locations.
JPWF1
JAR
24-Pin PWR
8-Pin PWR
DIMM2A
DIMM1A
DIMM2B
DIMM1B
DIMM2C
DIMM1C
X7DCL-3/i
JPL2
LAN
CTRL
Intel 5100
North Bridge
I-Button
LAN
CTRL
Slot6 PCI-E x8
SP1
Buzzer
Slot5 PCI-E x8
Slot4 PCI-E x4(in x8 slot)
VGA
CTRL
JPG1
Slot3 PCI 33MHz
Slot2 PCI 33MHz
S I/O
JWD1
JWOL1
Slot1 PCI 33MHz

System Status LED

COM2
SIMLC
CPU1 VRM OH LED
B
SMB_PS
CPU1
CPU2
C LED6
CPU2 VRM OH LED
JP2
JP1
Intel
ICH9R
PWR LED
LED3
South Bridge
JBT1
LED1
BIOS
Battery
LSI
SAS
CTRL
ITE
SAS-GPIO1
A CTRL
SAS-GPIO0
JPA2
LED4
USB4/5
USB2/3
JL1
2
BPI C
2-29
Chapter 2: Installation
Status LED Indicator
Settings
LED Color Defi nition
Green Power On, system: normal
Red PWR on, PWR problem(s)
occur(s) or the 3rd PWR
not properly installed
Yellow System Off, AC PWR:
connected
CPU_VRM Overheat LED Indicator
Settings
LED# Description
LED5: On CPU1_VRM Overheating
LED6: On CPU2_VRM Overheating
A. LED4: System Status LED
LED5
B. LED5: CPU1_VRM OH LED
C. LED6: CPU2_VRM OH LED
Fan 2
Fan 3
Fan 4