Specifications - Epson TM-P60 User Manual

Specifications

Print method
Print density
Printing width (default)
Print font Font
Characters per line Font A: 35, Font B: 42, Font C: 52
Character size
(W×H)
Character set
Paper Roll paper
dimensions
(default)
Paper roll spool
diameter
Receipt paper
Label roll paper
Print speed
Interface
Receive buffer
Power Specified battery
consumption
AC adapter:
EPSON PS-10
(Model DA-42Y12)
LPS power supply
Life Label
Receipt
Print head
Temperature Operation
/humidity
Storage
Overall dimensions (mm)
Mass (with the battery, without
roll paper)
*1: For the battery specifications, see its instructions.
Thermal line printing
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
48.5 mm {1.91"}, 388 dot positions (label width 54 mm {2.13"},
backing paper width 58 mm {2.28"})
Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
95 Alphanumeric, 48 International, 128 × 10 Graphic
29.5 ± 0.5 mm ~ 57.5 ± 0.5 mm {1.16 ± 0.02"} ~ {2.26 ± 0.02"}
(59.5 ± 0.5 mm {2.34 ± 0.02"} by removing the spacer
installed)
outside 31.4 mm {1.24"} or more
Original: Kanzaki Specialty Paper (USA):
P350 (paper thickness: 62 µm), P310 (paper thickness: 58 µm)
P300 (paper thickness: 56 µm)
ETLA058050025, ETLA055050051, ETLA029050025
Maximum 80 mm/s {3.15 in/s} (maximum 40 mm/s {1.57 in/s}
when using the peeler), when number of dots per dot line is
64 dots or less (printing with a fully charged battery, at 25°C
{77°F}, print density 100%)
Serial (RS-232)/Bluetooth
128 bytes
*1
Lithium-ion battery: Product name: LIP-2500
Trade name: Seiko Epson Corporation
Output: DC 7.4 V, Capacity: 2200 mAh
Output voltage: DC 12 V
Input voltage: AC 100 V ~ 240 V
Product name: PS-10, Trade name: Seiko Epson Corporation
Output voltage: DC 12V
Output current: 0.06A ~ 3.5A
Note:
Should be a listed Class 2 power unit or LPS power supply.
500,000 labels
10,000,000 lines printing
100,000,000 dots
5 ~ 45°C {41 ~ 113°F}, 10 ~ 90% RH
Abnormal operations not found when the printer is left under
the environment of 25°C {77°F}, 60% RH for 2 hours after it was
left in the following conditions:
High temperature and humidity: 50°C {122°F}, 90% RH for 120 hours
High temperature: 70°C {158°F} for 120 hours
Low temperature: -25°C {-13°F} for 120 hours
103 × 159 × 65 {4.1 × 6.3 × 2.6"} (W × D × H)
Approx. 640 g {1.41 lb}
®
TM-P60 with Peeler User's Manual 15
English