[:Source<Hw>]:Bb:arbitrary:cfr:cspacing; [:Source<Hw>]:Bb:arbitrary:cfr:dcfdelta; [:Source<Hw>]:Bb:arbitrary:cfr:filter; [:Source<Hw>]:Bb:arbitrary:cfr:forder - Rohde & Schwarz R&S SMW-K548 User Manual

®
R&S SMW-K548
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:CSPacing <ArbCfrChanSpac>
Sets the channel spacing, if
SIMPle.
Parameters:
<ArbCfrChanSpac>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:DCFDelta <ArbCfrDCFDelta>
Sets the value difference by which you want to change your crest factor.
Parameters:
<ArbCfrDCFDelta>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:FILTer <ArbCfrFilterMod>
Selects which filter mode is used for the filtering.
Parameters:
<ArbCfrFilterMod>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:CFR:FORDer <ArbCfrMaxFilOrd>
Sets the maximum filter order, if
set to ENHanced.
User Manual 1179.0939.02 ─ 05
See "Cancellation Pulse Bandwidth"
[:SOURce<hw>]:BB:ARBitrary:CFR:FILTer
float
Range: 0 to depends on the sample rate of the loaded file
Increment: 0.1
*RST: 250E6
See Example"Applying clipping and filtering algorithm"
on page 16.
See "Channel Spacing"
float
Range: -20 to 0
Increment: 0.1
*RST: -3
See Example"Applying clipping and filtering algorithm"
on page 16.
See "Desired Crest Factor Delta"
SIMPle | ENHanced
*RST: SIMPle
See Example"Applying clipping and filtering algorithm"
on page 16.
See "Filter Mode" on page 13
[:SOURce<hw>]:BB:ARBitrary:CFR:FILTer
Remote-control commands
on page 15
on page 14
on page 12
is set to
is
19