Supermicro X7DA3 User Manual page 78

X7DA3 User's Manual
Hardware Monitor Logic (*See the Note on Page 4-18.)
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that will activate
the alarm system when the CPU temperature reaches this pre-set temperature
threshold. The hardcode default setting is 72 o C. (*See the note below.)
Temperature Monitoring
Highlight this and hit <Enter> to see the status of each item below:
CPU1 Temperature/CPU1 Second Core/CPU2 Temperature/CPU2 Second
Core
PECI Agent 1 Temperature/PECI Agent 2 Temperature/PECI Agent 3 Temperature/
PECI Agent 4 Temperature/System Temperature
Fan1-Fan8 Speeds: If the feature of Auto Fan Control is enabled, the BIOS will
automatically display the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. If set to "Server", the fan speed will be set to optimize server performance.
If the option is set to "Workstation", the fan speed is set to optimize workstation
performance. Select "Quiet" for the fans to operate as quiet as possible. Select
"Disable" to disable the fan speed control function to allow the onboard fans to run
at the full speed (12V) at all time. The Options are: 1. Server, 2. Workstation, 3.
Quiet, 4. Disable (Fans run at the full speed.)
Voltage Monitoring
The following items will be monitored and displayed:
Vcore A:/Vcore B:
-12V
P1V2_NIC_SEN
+3.3V
+12V
5Vsb/5VDD
P_VTT
Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take prece-
dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.
4-20