Supermicro X7DA3 User Manual page 75

Chapter 4: BIOS
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to decide where to redirect the console to: Onboard COM
A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to select the BAUD rate for your console redirection. The
options are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to select the console type for your console redirection.
and
The options are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+,
VT-UTF8.
Flow Control
This item allows you to set the fl ow control for your console redirection. The
options are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how your console redirection is to be connected:
either Direct or Via Modem.
Continue CR after POST
This item allows you to decide if you want to continue with your console redirection
after the POST routine. The options are On and Off.
4-17