Glan 1/2 (Ethernet) Ports - Supermicro X7DA3 User Manual

GLAN 1/2 (Giga-bit Ethernet
Ports)
Two G-bit Ethernet ports are located
at JLAN1 on the IO backplane. This
port accepts RJ45 type cables.
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for the
speaker. See the table on the right
for speaker pin definitions.
The speaker connector pins are to be
used with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
LAN1/2
CD2 CD1
A
Line-In/
Line-
JPAC
Out
Mic
SIM LP IPMI
PCI-Exp x16
PCI-33MHz
Note:
CPU
PSF
J17
Fan 1
J3P
JAR
SAS
Controller
2-19
Chapter 2: Installation
GLAN1
GLAN2
Speaker Connector
Pin Setting Defi nition
Pins 6-7 Internal Speaker
Pins 4-7 External Speaker
8-pin PWR
JPW3
A. GLAN1/2
B B. PWR LED/Speaker