Supermicro X7DA3 User Manual page 62

X7DA3 User's Manual
IDE Channel 0 Master/Slave, SATA Port0, SATA Port1, SATA
Port2, SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/
Slave, SATA Port0, SATA Port1, SATA Port2, SATA Port3 slots. Hit <Enter> to
activate the following sub-menu screen for detailed options of these items. Set
the correct confi gurations accordingly. The items included in the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. The option
"User" will allow the user to enter the parameters of the HDD installed at this
connection. The option "Auto" will allow the BIOS to automatically confi gure the
parameters of the HDD installed at the connection. Choose the option 1-39 to
select a predetermined HDD type. Select CDROM if a CDROM drive is installed.
Select ATAPI if a removable disk drive is installed.
4-4