Hood Operation - Whirlpool WT7BTAS Health & Safety, Use & Care, Installation Manual And Online Warranty Registration Information

Table of Contents

Advertisement

NOTE:
 Make sure the filter is affixed properly. Otherwise, it will be loosen and cause dangerous.
 When carbon filter attached, the suction power will be lowered.
 Do not clean or wash the carbon filter; carbon filter replacement frequency should be determined
based on cooking habits.
 It is recommend to use induction hob when the hood is converted to recirculating hood.
LED Touch Panel
Heat auto clean/
Delay off
After connecting the cooker hood to main supply, the backlight of all buttons will turn on and will buzz
once. Then cooker hood will stay at stand-by mode.
1.
Power:
 Press
Press
again, cooker hood will stop operate.
 Cooker hood speed can only be adjusted when power is on.
 Switch off cooker hood with
the speed per last operation.
2.
Fan Speed:
The cooker hood has three speed levels, they are low, mid and high, the corresponding LED display
will be "1", "2", "3".
 Press
button, cooker hood starts to work at low speed and the LED display will show "1".

Hood Operation

Lamp
button, cooker hood starts to operate at low speed and LED display will show "1".
uninstall
install
LED Display
button, when you switch on the hood again, it will operate at
26
Speed
Power

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wt9btas

Table of Contents