A&D UA-1200CNBLE Instruction Manual page 19

MEASUREMENT
Multiuser Mode Measurement
1. Up to 6 people can use and store readings on the app.
Each user must have a mobile device paired with the
monitor. (See pg. E-15 for pairing instructions.)
2. If you are taking the reading without the app, press the
Start button on the monitor to switch between usernames.
Select the desired user before each reading. Data will
transfer to the app on your next connection.
Note: Usernames will be displayed in order of greater usage frequency.
Visitor Mode Measurement
1. Press the Start button on the monitor.
2. Press the Start button again to switch between
usernames and select "0 Visitor".
3. Measurement starts automatically after 3 seconds.
4. When the measurement is complete, the monitor will
display results similar to the icon on the right.
diastolic and pulse rate will scroll.)
Visitor Mode is only available through the monitor. Data is
not stored in visitor mode.
(Systolic,
E-19