A&D UA-1200CNBLE Instruction Manual page 18

MEASUREMENT
Offline Mode Measurement
1. Press the Start button on the monitor.
After the A&D logo appears for 1 second,
the User Select screen will display.
2. Press the Start button again to select a user or switch
between username from User Select screen.
Username can be changed in the app under Settings. When this
is not set, the first name will display as the username.
Selected user
3. Measurement starts automatically after 3 seconds.
4. Zero(0) is displayed blinking briefly.
Then the display changes, as
measurement begins.
5. The cuff starts to inflate. It is normal
for the cuff to feel tight. The monitor
displays the pressure value once
inflation starts.
6. When the measurement is complete,
the monitor will display results similar
to the icon on the right.
diastolic and pulse rate will scroll.)
Note: Press the start button again to turn the monitor off. The monitor is also
provided with an automatic power shut-off function. Allow at least one minute
between measurements on the same person.
E-18
User number
Monitor Display
Username
(Systolic,