Table of Contents
Related Manuals for A&D UA-789 XL
Summary of Contents for A&D UA-789 XL
- Page 1 Digital Blood Pressure Monitor Model UA-789XL Instruction Manual Original Manuel d’instructions Traduction Manual de Instrucciones Traducción Manuale di Istruzioni Traduzione Bedienungsanleitung Übersetzung 使用手冊 翻譯 1WMPD4001765C...
-
Page 2: Table Of Contents
Contents Dear Customers................... 1 Preliminary Remarks ..................2 Precautions ....................2 Parts Identification ..................3 Symbols ....................... 4 Operation Mode................... 5 Using The Monitor ..................6 Installing / Changing The Batteries ............6 Connecting The Air Hose ................ 6 Connecting The AC adapter ..............6 Adjusting The Built-in Clock .............. -
Page 3: Preliminary Remarks
Preliminary Remarks This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark of conformity. (0123: The reference number to the involved notified body) The device is designed for use on adults only, not newborns or infants. Environment for use. -
Page 4: Parts Identification
Contraindications The following are precautions for proper use of the device. People who have a severe circulatory deficit in the arm must consult a doctor before using the device, to avoid medical problems. Do not self-diagnose the measurement results and start treatment by yourself. Always consult your doctor for evaluation of the results and treatment. -
Page 5: Symbols
Symbols Symbols Function / Meaning Recommended Action Standby and Turn the device on. CLOCK button mark If you want to stop the sound, press the START button. Alarm ON/OFF mark of the reminder Systolic blood pressure in mmHg SYS. Diastolic blood pressure in mmHg DIA. -
Page 6: Operation Mode
Symbols Function / Meaning Recommended Action WEEE label Refer to instruction manual/booklet Serial number Polarity of DC jack Operation Mode 1. Normal Measurement With Storing Data (Refer to page 10) Press the button. Blood pressure is measured and data is stored START within the device. -
Page 7: Using The Monitor
Using The Monitor Installing / Changing The Batteries 1. Slide the battery cover up to open it. Step 2 2. Remove the used batteries and insert batteries into battery compartment as shown, taking care that the polarities (+) and (-) are correct. -
Page 8: Adjusting The Built-In Clock
Using The Monitor Adjusting The Built-in Clock The device has a built-in clock. We recommend that you adjust the clock prior to use. 1. Press and hold the button until the digits start blinking. CLOCK 2. Select the year using the button. -
Page 9: Alarm On/Off Mark On The Display
Using The Monitor Alarm ON/OFF Mark On The Display When the alarm is on, a “p” appears on the LCD. To turn the alarm off, simply press the button once. The alarm will sound for 1 minute. To stop the CLOCK alarm sound, press the button once. -
Page 10: How To Take Proper Measurements
How To Take Proper Measurements For the most accurate blood pressure measurement: Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs. Keep your feet on the floor and straighten your back. Relax before measurement. -
Page 11: Measurements
Measurements Model UA-789XL is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg, read "Measurement With The Desired Systolic Pressure" on the next page. Normal Measurement 1. -
Page 12: Measurement With The Desired Systolic Pressure
Measurements Measurement With The Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg, use this procedure. 1. Place the cuff on the arm (preferably the left arm). At heart level 2. Press and hold the button until a START number about 30 to 40 mmHg higher than Press and hold the button... -
Page 13: Recalling Memory Data
Recalling Memory Data Note: This device stores the last sixty measurements in memory automatically. The data is retained as long as the batteries are in the device. When you remove the batteries or the batteries are drained, the data will be erased. Press the button 1. -
Page 14: Who Classification Indicator
WHO Classification Indicator Each segment of the bar indicator corresponds to Example: the WHO blood pressure classification described on the next page. WHO Classification Indicator Severe hypertension Moderate hypertension Moderate hypertension Mild hypertension High normal Normal Optimal Mild hypertension The indicator displays a segment, based on the current data, corresponding to the WHO classification. -
Page 15: Who Blood Pressure Classification
WHO Blood Pressure Classification Standards to assess high blood pressure, without regard to age, have been established by the World Health Organization (WHO), as shown in the chart. Blood Pressure Variations An individual’s blood pressure varies greatly on a daily and seasonal basis. -
Page 16: Troubleshooting
Troubleshooting Problem Possible Reason Recommended Action Batteries are drained. Replace all batteries with new ones. Nothing appears on the display, Reinstall the batteries with negative Battery terminals are not in even when the and positive terminals matching those the correct position. power is turned on. -
Page 17: Technical Data
Technical Data Type UA-789XL Measurement method Oscillometric measurement Measurement range Pressure: 20 - 280 mmHg Pulse: 40 - 200 beats / minute Measurement accuracy Pressure: ±3 mmHg Pulse: ±5% Power supply 4 x 1.5V batteries (R6P, LR6 or AA) or AC adapter (TB-242)(Not included) Number of measurements Approximately 200 measurements, when AA Alkaline batteries are used, with pressure value of 180 mmHg... - Page 18 Accessories sold separately Cuff Catalog Number Cuff Size Arm Size CUF-D-LA Large adult cuff 32 cm to 45 cm CUF-B-XLA Extra larg adult cuff 42 cm to 60 cm Arm size: The circumference at the biceps. AC adapter Catalog Number Plug (Outlet type) TB-242C Type C...
- Page 19 MEMO English 18...
- Page 20 Asahi 1-243, Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A.