Factory Default; Display Options - PRESONUS FaderPort 16 Owner's Manual

8 Customizing Your FaderPort
8.4

Factory Default

Factory Default
8.4
Factory
Tune Tune Factory Tests Display
Default
Faders Touch Default Contrast
Sensitivity
8.5

Display Options

Contrast
Display
Tune Tune Factory Tests Display Display
Contrast
Faders Touch Default Contrast Brightness Build Rev:
Sensitivity Build Date:
Build Time:
Turn knob
to adjust Apply
<- Back
contrast
Turn knob
Apply
to adjust Apply
<- Back
contrast
Brightness
Display
Tune Tune Factory Tests Display Display Version: 2.00
Brightness
Faders Touch Default Contrast Brightness Build Rev: 12913
Sensitivity Build Date: Oct 20 2017
Build Time: 21:59:26
• Turn LEDs on. This test mode turns on all LEDs, allowing you to verify their
functionality. Press the Select button below "Turn LEDs off" to end the test.
• Set LEDs (red, green, blue). These test modes allow you
to test the color functionality of the RGB LEDs.
• Test Inputs. Use this mode to test the faders and encoders.
In the unlikely event that a firmware update fails, restoring your FaderPort to Factory
Default will allow you to restore your unit to its factory firmware version.
Display
Brightness
Press the Select button below "Display Contrast" to set the contrast of the scribble
strip displays to your desired setting.
Version: 2.00
12913
Oct 20 2017
21:59:26
Turn the Pan/Param encoder on the left until the desired setting has been reached.
Press Apply to set.
Press the Select button below "Display Brightness" to adjust your Scribble Strip
display settings. You can choose between Dim, Medium, and Bright.
FaderPort™ Multichannel Production Controllers
Owner's Manual
59