6
Sonar (MCU)
6.1
Getting Started
1
2
3
4
5
PN
8. Click "Apply" and then "OK" to close the window.
9. Click on the ACT panel button.
10. Click on the Control Surface Properties button.
11. From the Control Surface Properties window, click
on the Configure Layout button.
12. On your FaderPort 16, press the Marker button.
13. Turn the Pan /Param encoder one click to the right, until the scribble strips
display 1-16.
6
14. In Sonar, click on the "Press Again When Done" button and close the window.
Your FaderPort 16 is now ready to use. Enjoy!
FaderPort™ Multichannel Production Controllers
Owner's Manual
40