5
Cubase / Nuendo (MCU)
5.1
Getting Started
1. Go to Devices | Device Setup.
2. In the Setup window, click the "Add/Remove" menu
to add the first Mackie Control device.
3. Select "Mackie Control" from the pull-down menu.
4. Set the MIDI Input and Output to "PreSonus FP16 Port
2" or "PreSonus FP8" (model dependent).
5. Click "Apply. "
FaderPort 8 Users: Please skip to Step 10.
FaderPort 16 Users: Please continue through the
remaining steps to complete set-up.
FaderPort™ Multichannel Production Controllers
Owner's Manual
31