PRESONUS FaderPort 16 Owner's Manual page 42

6 Sonar (MCU)
6.1 Getting Started
6 Sonar (MCU)
6.1 Getting Started
Select Control Mode
MCU
Studio MCU MCU MCU HUI SETUP
(Sonar)
One (Logic) (Cubase) (Sonar)
Control Mode EXIT
MCU MCU MCU HUI SETUP EXIT
Restart
(Logic) (Cubase) (Sonar) Restart
FaderPort
FaderPort
The default operation mode for the FaderPort is Studio One. To switch to Sonar
operation, power on the unit while pressing the first two select buttons.
This will open the boot mode screen, and you will be given the opportunity to select
which mode of operation you'd like to use. When using the FaderPort with Sonar,
EXIT
Restart
FaderPort select MCU (Sonar) by pressing the Select button below its scribble strip.
Once you have selected your mode, press the Select button below the "Exit" screen
to reboot your FaderPort. This mode will be selected automatically every time you
boot your FaderPort.
If you would like to change the mode at any point, power on the
unit while holding down the first two Select buttons.
Power User Tip: From this menu, you can also adjust the fader sensitivity and speed to
fine tune your FaderPort to work the way you want it. Please see Section 8 for more
information on the customized setup modes.
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
Once you have connected your FaderPort to your computer, launch
Sonar to set up the FaderPort as a Mackie Control Universal device.
FaderPort 16 Users: Because Mackie Control Universal is an 8-channel protocol, you
will need to create two devices: one Mackie Control and one Mackie ControlXT.
FaderPort™ Multichannel Production Controllers
Owner's Manual
38