Onboard Audio Enable/Disable; Scsi Channel Termination Enable/Disable; Serial Ata Enable/Disable - Supermicro X5DAE User Manual

Onboard Audio Enable/
Disable (not on X5DAL-G/
X5DAL-TG2)
AC'97 brings high quality audio to
PCs. When enabled with JP40, audio
is processed onboard.
setting should be selected when you
wish to use an PCI add-on card for
audio. See the table at right for
jumper settings.
SCSI Channel Termination
Enable/Disable (X5DA8)
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
each SCSI channel.
controls channel A and JPA2 con-
trols channel B. The default setting
is open to enable (teminate) both
SCSI channels.
the right for jumper settings.
Note: In order for the SCSI drives
to function properly, please do not
change the default setting set by
the manufacturer.

Serial ATA Enable/Disable

(X5DAL-TG2)
Jumpers JPA1 and JPA2 allow you
to enable or disable the Serial ATA
headers. Jumper JPA1 is for head-
ers #1 and #2 and JPA2 is for head-
ers #3 and #4. The default setting
is pins 1-2 to enable all four head-
ers. See the table on the right for
jumper settings.
The disabled
Jumper JPA1
See the table on
2-17
Chapter 2: Installation
AC97 Enable/Disable
Jumper Settings (JP40)
Jumper
Position Definition
1-2 Enabled
2-3 Disabled
SCSI Channel T ermination
Enable/Disable
Jumper Settings
(JPA1, JPA2)
Jumper
Position Definition
Open Enabled
Closed Disabled
Serial AT A Enable/Disable
Jumper Settings
(JPA1, JPA2)
Jumper
Position Definition
Pins 1-2 Enabled
Pins 2-3 Disabled