Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EdilKamin CUBIRA 12
Summary of Contents for EdilKamin CUBIRA 12
- Page 1 CUBIRA 12 WOOD BOIler-stOve CUBIRA 12 Cs Installation, use and maintenance...
-
Page 2: Table Of Contents
305/2011 and the harmonized european standard eN 13240:2001 + A2:2004 + AC:2006 + AC:2007 WOOD stOves, trademark eDIlKAMIN, called CUBIrA 12 /CUBIrA 12 Cs Year of manufacture: ref. Data nameplate CUBIrA 12 /CUBIrA 12 Cs Declaration of Performance DoP eK n° :... - Page 3 If you lose it, you can request a copy or download it from • the declaration of conformity given to you by the installer. www.edilkamin.com the warranty conditions are given in the warranty certificate After unpacking the product, check the condition and accompanying the product.
-
Page 4: Safety Information
• fixing up and irreversible changes to the colour of your own initiative, but contact the retailer or installa- the paint on the metal parts. edilkamin or the retai- tion technician. ler cannot be held liable. - Page 5 GENERAL INFORMATION CUBIrA e CUBIrA Cs - internal dimensions of hearth cm 33 (l) x 34 (P) x 38/50 (H) M without kit Mandata serpentina Serpentina porta- Portasonda sonda thermal dis- Valvola sicurezza charge valve (CUBIrA Cs) r without Ritorno A Ø...
-
Page 6: Technical Data
°C Minimum draught Fume flow capacity 10,4 * the heating volume is calculated with the heat request of 33 Kcal/m³ hour EDILKAMIN s.p.a. reserves the right to change the products at its discretion without notice. - Page 7 pACKAGING pREpARATION AND UNpACKING TO REMOVE THE pRODUCT FROM THE the materials composing the packaging are not toxic pALLET: or harmful, therefore no particular disposal processes - remove the top are required. - remove the sides storage, disposal and any recycling is the responsibility - remove the fastening screws (V) on the pallet on of the end user in compliance with the laws in force on both sides of the stove...
-
Page 8: Installation
INSTALLATION INSTALLING THE OpTIONAL FAN KIT IF YOU DO NOT INSTALL THE the CUBIrA and CUBIrA Cs are designed for heating OpTIONAL FAN KIT, YOU MUST water and the room in which they are installed. OpEN THE pANEL (C) UNDER THE they heat the room by means of radiation and natural TOp. - Page 9 INSTALLATION EXTERNAL AIR INTAKE REMARKS ON INSTALLATION to re-integrate burnt oxygen during stove functioning, you need to have an installation premises suitable for Note that: the external air intake. • the appliance may only be installed by a qualified In general, we suggest two ways for ensuring a proper technician authorised to issue the declaration of flow of combustion air.
- Page 10 INSTALLATION CHIMNEY SYSTEM THE SMOKE CHANNEL (Smoke channel, chimney flue and chim- • if in metal must have a CE marking (EN 1856-2) or ney stack) similar national law; this chapter is drafted according to the european • cannot be in flexible metal material standards eN 13384, eN 1443, eN 1856, eN 1457. • to check the flow, a shutter is advised for draft over the installation technicians must take into considera- 25 Pa tion these and any other local standards.
- Page 11 Plumbing depends on the type of system. FOR OpEN/CLOSED EXpANSION VESSEL However, there are some “general rules”: • the presence of an accumulator (tank) is For simple installation, edilkamin offers pre-assembled recommended but not mandatory. Its advantage is kits for installation outside the product. that it releases the boiler from “sudden” requests...
- Page 12 (vst - provided by to the appliance itself. edilkamin) must be connected to the cooling circuit • the safety line to the expansion vessel must be (Al) with a pressure of at least 1.5 bar.
- Page 13 INSTALLATION OpTIONAL INTERNAL WATER CIRCUIT KITS (R, RW, R2, RW2 WITH WATER CIRCUIT ADApTER KIT) For simple installation, edilkamin offers pre-assembled kits for installation inside the product. the product you require depends on the type of circuit you are installing.
- Page 14 • possible irreversible changes to the colour of the paint on the metal parts for which edilkamin or the retailer cannot be held liable. to respect the environment and safety, do NOt burn, among other things: plastic, varnished wood, coal and bark waste.
- Page 15 ISTRUCTIONS FOR USE FIRST SWITCH ON pHASES Lighting a cold fireplace • ensure you have read and understood the content 1. Check the existing ash bed is not too high. If the of this manual ash bed is too high, there is a danger of opening the • remove all the inCUBIrAble parts from the door of the fireplace to add wood and possible brazier product (manuals, labels, etc.).
-
Page 16: Maintenance
MAINTENANCE Before doing any maintenance, disconnect ATTENTION! the appliance from the mains. All the cleaning operations of all the parts should be carried out with the stove com- Regular maintenance essential pletely cooled. keeping the appliance in good working Cleaning the glass order. - Page 17 DISpOSAL breaking it. At the end of its service life, dispose of the product as required by regulations. the refractory deflector is subject to wear. Neither your reseller nor edilkamin are liable for breakage, whether accidental or due to wear.
-
Page 18: In The Event Of Problems
• use of fuel other than that recommended the seals of the fireplace are intact: the door of the fireplace is closed properly. edilkamin or the retailer cannot be held liable for damage caused as described above 3) If the glass gets dirty quickly, check if: The wood used is dry. - Page 20 *941339-GB* w w w . e d i l k a m i n . c o m cod. 941339-GB 02.17/C...
Need help?
Do you have a question about the CUBIRA 12 and is the answer not in the manual?
Questions and answers