Supermicro 7045B-3 User Manual page 121

Supermicro superserver 7045b-3 servers: user guide
Table of Contents

Advertisement

Appendix E: System Specifi cations
Appendix E
System Specifi cations
Processors
Single or dual Intel® dual-core Xeon® 5300/5100/5000 Sequence type
processors at a front side (system) bus speed of 1333/1066/667 MHz.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 5000P/ESB2 chipset
BIOS
8 Mb Phoenix® Flash ROM
Memory Capacity
Eight 240-pin DIMM sockets supporting up to 32 GB of FBD ECC DDR2-
667/533 SDRAM
Note: 2-way interleaved memory - requires memory to be installed four modules at a time. See
the memory section in Chapter 5 for details.
SAS Controller
Adaptec 9410 controller for 8-port SAS (RAID 0, 1 and 10 supported)
SAS Drive Bays
Eight (8) hot-swap drive bays to house eight (8) SAS drives
Peripheral Drive Bays
One (1) 3.5" fl oppy drive
Two (2) 5.25" drive bays
Expansion Slots
Two PCI-Express x8 slots, one PCI-Express x4 slot, two 64-bit 133 MHz PCI-X
slots and one 64-bit 100 MHz PCI-X slot
E-1

Advertisement

Table of Contents
loading

Table of Contents