Table of Contents
Advertisement
S
UPERSERVER 7044H-32R User's Manual
I
2
C to PCI Enable/Disable
JI
2
C1/2 pair of jumpers allow you to
connect the System Management Bus
to any one of the PCI slots. The default
setting is on pins 1-2 for both jumpers
to enable the connection. Both con-
nectors must have the same setting
2
(JI
C1 is for data and JI
clock). See the table on right for jump-
er settings.
5-10 Onboard Indicators
JLAN1/JLAN2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gigabit LAN port, the yellow
(right) LED indicates activity while the
left LED may be green, orange or off
to indicate the speed of the connec-
tion. See the table on the right for
the functions associated with the left
(connection speed) LED.
SAS Activity LED Indicators
The SAS Activity LED indicators
(DS1-DS8) indicate the activity status
of SAS ports (0-7). See the table on
the right for pin defi nitions.
2
C2 is for the
DS# Defi nition
DS1
DS2
DS3
DS4
5-20
I
2
C to PCI Enable/Disable
Jumper Settings
(JI
2
C1/2)
Jumper Setting
Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
JLAN Left LED
(Connection Speed Indicator)
LED Color
Defi nition
Off
10 MHz
Green
100 MHz
Amber
1 GHz
SAS Activity LED Indicators
(DS9-DS16)
DS# Defi nition
SAS0:Act
DS5
SAS4:Act
SAS1:Act
DS6
SAS5:Act
SAS2:Act
DS7
SAS6:Act
SAS3:Act
DS8
SAS7:Act
Advertisement
Table of Contents
