Supero SuperServer 6113M-i User Manual page 38

S S
UPER ERVER 6113M-i User's Manual
Installing the Serverboard into the Chassis
Note: To optimize the functionality and capability of the i2DMR-iG2, we
strongly recommend that it be installed in Supermicro's SC813Hi-500W
proprietary chassis.
1. Locate the six 6-32 9-mm screws (included in the retention mechanism
shipping package).
2. Locate the six mounting holes on the serverboard and their six correspond-
ing mounting holes in the chassis (see the picture below).
3. Align the six mounting holes on the serverboard against the corresponding
mounting holes in the chassis.
4. Secure the serverboard to the chassis by screwing in the six 6-32 9-mm
screws into the aligned holes on the serverboard and chassis.*
5. Locate the six 6-32 4.5-mm screws (included in the chassis mounting kit).
Screw these 6-32 4.5-mm screws into all the remaining mounting holes on
the serverboard and their corresponding mounting holes in the chassis.*
*Recommended torque: not to exceed 6 in-lbf.
1.) Screw six 6-32 9-mm screws into the
mounting holes on the serverboard and on
the chassis.
2.) Secure the serverboard to
the chassis by screwing the 6-
32 4.5-mm screws into all the
remaining mounting holes on the
serverboard and the chassis.
5-4