Cisco Nexus 9804 NX-OS Hardware Installation Manual page 29

Unpack and Install the Chassis
Figure 11: Chassis Ground Receptacles
Step 2
Use the wire stripper to strip one end of the 2-AWG wire approximately 0.75 inches (19.05 mm).
Step 3 Insert the 2-AWG wire into the wire receptacle on the grounding lug.
Figure 12: Ground the Chassis
1 Locate ground 4 Align the lug holes
Cisco Nexus 9804 NX-OS Mode Switch Hardware Installation Guide
Ground the Chassis
23