Advertisement
Chapter 6 Touch Screen Display and Operation Examples
6.7 Running Log
The running log interface is shown in Figure.6-19. This interface can monitor and find running
records, operation records, alarm records, fault records, etc., as shown in Figure.6-19 to Figure.6-
22.
6.7.1 Running Records
After entering the running records screen, the HMI opens the running list by default. Each time
the records are sampled: record date, record time, given frequency, running frequency, input voltage,
input current, output voltage, output current, torque, and every time after a certain time, the next
running record is collected.
6.7.2 Operation Record
After entering the operation record screen, HMI opens the operation list by default, and each
record sampling has: operation number, operation date, operation time, operation instruction, and
each relevant AC drive operation is recorded once.
ACH200 Series High Voltage Variable Frequency Speed Control System Operating Manual
Figure.6-19
62
Advertisement
