Advertisement
Chapter 6 Touch Screen Display and Operation Examples
6.3 Home Screen
The Home screen is shown in Figure. 6-6, which can set the frequency and start/stop of the
system.
Note: Frequency setting, system startup, stop, and reset can be performed on this interface. Click
the "
" button in the upper right corner to enter the corresponding help instructions on this
interface. According to this help prompt, you can quickly get started and operate. Click the "
button on this interface to directly return to the monitoring interface. The operator can only operate
these, and other functions such as auxiliary functions, parameter settings, instant messages, and
operation logs only have monitoring permissions. The administrator has no right to change any other
parameters or operate any other buttons. However, they can click on some buttons to enter the next
interface and modify and adjust the corresponding parameters.
6.4 Auxiliary Functions
The auxiliary function can have three modes for selection, which are: frequency conversion,
mains frequency, and cut off high voltage power. When switching to frequency conversion, you can
select forward jog, reverse jog, and reverse operation. The screen is as follows:
ACH200 Series High Voltage Variable Frequency Speed Control System Operating Manual
Figure.6-6
55
"
Advertisement
