Table of Contents
Advertisement
Super IO Configuration
OnBoard Floppy Controller
Select "Enabled" to enable the Onboard Floppy Controller. The options are
"Disabled", and "Enabled."
Serial Port1 Address
This option specifies the base I/O port address and Interrupt Request ad-
dress of Serial Port 1.
accessing any system resources. When this option is set to Disabled, the
serial port physically becomes unavailable. Select "3F8/IRQ4" to allow the
serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt
address. The options are "Disabled", "3F8/IRQ4", "3E8/IRQ4" and "2E8/IRQ3".
Serial Port2 Address
This option specifies the base I/O port address and Interrupt Request ad-
dress of Serial Port 2.
accessing any system resources. When this option is set to Disabled, the
serial port physically becomes unavailable. Select "2F8/IRQ3" to allow the
serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt
address. The options are "Disabled", "2F8/IRQ3", "3E8/IRQ4" and "2E8/IRQ3".
Serial Port2 Mode
This feature sets the Serial Port2 Mode. The options are "Normal", IrDA",
and "ASK IR".
Parallel Port Address
This option specifies the I/O address used by the parallel port.
Disabled to prevent the parallel port from accessing any system resources
and to render the printer port unavailable. The majority of parallel ports on
computer systems use IRQ7 and I/O port 378H as the standard setting. The
options are"Disabled", 278" and "3BC"
Select "Disabled" to prevent the serial port from
Select "Disabled" to prevent the serial port from
7-15
Chapter 7: AMIBIOS
Select
Advertisement
Table of Contents
