Table of Contents
Advertisement
Available languages
Available languages
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received all the components of your new Kenmore Bagless Upright
Vacuum Cleaner.
1. Insert the handle into the wand until you
hear a 'click'.
2. Insert the wand into the main body until
you hear a 'click'.
ASSEMBLY INSTRUCTIONS
- 8 -
3. Align the attachment holder clip with
the front of the wand as shown. Make
sure the oval hole aligns with the
corresponding protrusion on the wand.
Push and snap into place on wand.
4. Align the hose storage with the back of
the wand as shown. Make sure the large
oval hole aligns with the corresponding
protrusion on the wand. Push and snap
into place on wand.
Attachment
Holder
Hose
Storage
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FeatherLite DU1096 and is the answer not in the manual?
Questions and answers
I can’t get the bottom off to change the belt. All screws are out
To remove the bottom of a Kenmore FeatherLite DU1096 to change the belt, follow these steps:
1. Use a Phillips head screwdriver to remove the six screws from the belt cover and the lower plate.
2. Remove the belt cover from the floor nozzle.
3. Lift the lower plate combined with the brushroll. Be cautious, as there are sharp edges inside to prevent hair entanglement, and avoid putting any part of your body into the floor brush during maintenance.
Proceed with changing the belt as described in the manual.
This answer is automatically generated