Supermicro SuperServer 6010L User Manual page 98

Supermicro superserver 6010l servers: user guide
Table of Contents

Advertisement

S
S
6010L
UPER
ERVER
Beep
Code
1 beep
2 beeps
3 beeps
4 beeps
5 beeps
6 beeps
7 beeps
8 beeps
10 beeps
11 beeps
12 beeps
13 beeps
5 short +_1
long beeps
6 short + 1
long beeps
7 short + 1
long beeps
Manual
AMI BIOS Error Beep Codes
Error Message
Refresh
BIOS ROM file
absent
Base 64KB
memory failure
Flash program
successful
Media read error
Keyboard
controller Gate
A20 failure
Processor
exception
interrupt error
Display memory
read/write error
Flash erase error
Flash program
error
BIOS ROM file
incorrect size
BIOS ROM image
mismatch
Memory Error
Memory Error
SMBUS Error
Description
The memory refresh circuitry
on the motherboard is faulty
The BIOS was unable to find
the specific file name required
to flash the BIOS
Memory failure occurred in the
first 64KB of Memory
The flash was properly
programmed with the BIOS
ROM file.
The floppy or ATAPI media is
not presented or cannot be
The keyboard controller may
be bad. The BIOS cannot
switch to protected mode.
The CPU generated an
exception interrupt
The system video adapter is
either missing or its memory is
faulty. This is not a fatal error.
The flash device was unable to
be properly programmed.
The flash device was unable to
be properly programmed.
The BIOS ROM file found does
not match the size of the flash
device
The BIOS ROM file layout
configuration does not match
image present in the flash
device.
No memory detected in the
system
EDO memory detected in
system
SMBUS error
A-2
read

Advertisement

Table of Contents
loading

Table of Contents