S
S
6010L
UPER
ERVER
2.
Installing/removing hot-swap SCSI drives:
One SCSI drive bay is located in the front of the chassis, making it easily
accessible for installation and removal. The SCSI drive is a hot-swap
unit, meaning that it can be installed and removed without powering down
the system. To remove, first push the release button located beside the
drive LEDs, then swing the burgundy colored handle fully out and use it
to pull the unit straight out (see Figure 6-5).
Handle
Important:
!
drive bay to maintain proper airflow.
Manual
Release Button
Figure 6-5.
Removing the SCSI Drive
The SCSI drive carrier must remain in the
6-6