Riello RS 310/E ULX Installation, Use And Maintenance Instructions page 16

Technical data
Flame control Mains voltage
Mains frequency
Power absorption
Safety class
Load on Fuse on the flame control (can be inspected)
'input' terminals
Undervoltage
– Safety switch-off from operating position to mains
voltage
– Restart when mains voltage picks up
Cable length – Main line AC 230 V
– Control load (TL1-TL2)
– External reset button (RS)
– Load exit (DC 0/2...10V)
– Fuel valve
– Other lines
Environmental Storage
conditions – Climatic conditions
– Mechanical conditions
– Temperature range
– Humidity
Transport
– Climatic conditions
– Mechanical conditions
– Temperature range
– Humidity
Operation
– Climatic conditions
– Mechanical conditions
– Temperature range
– Humidity
Condensation, the formation of ice and the entry
of water are prohibited!
WARNING
20205048
Technical description of the burner
14 GB
AC 230 V -15% / +10%
50 / 60 Hz ±6%
< 30 W
I, with components in compliance with II and III, ac-
cording to DIN EN 60730-1
6.3 AT
< AC 186V
> AC 195V
Max. 100 m (100 pF / m)
Max. 20 m (100 pF/m)
Max 20 m (100 pF/m)
Max. 10 m (100 pF/m)
Max. 3 m (100 pF/m)
Max. 3 m (100 pF/m)
DIN EN 60721-3-1
Class 1K3
Class 1M2
-20 ... +60 °C
< 95% RH
DIN EN 60721-3-2
Class 2K2
Class 2M2
-30 ... +60 °C
< 95% RH
DIN EN 60721-3-3
Class 3K3
Class 3M3
-20 ... +60 °C
< 95% RH
Tab. G