Range Of Use; Technical Data; Scope Of Delivery; Installation - T.I.P. DRAIN 6000/36 Operating Instructions Manual

2. Range of use

Submersible pressure pumps from T.I.P. are most efficient electrical pumps designed for discharging water from
great depths. These high-quality products with their convincing performance data were developed for the various
applications involved with irrigation and for the further conveyance of the liquids being discharged under high
pressure. The units are suitable for discharging clean, clear water containing solids up to the maximum size
specified in the technical details. The typical areas of use of submersible pressure pumps include: Irrigation of
gardens and garden beds, domestic water supply with grey water from wells, cisterns and reservoir tanks, the
operation of irrigation systems, cleaning of terraces and sidewalks, discharge of water from great depths.
Submersible pressure pumps from T.I.P. are suitable for stationary or temporary installations. The device is not
suitable for use in swimming pools or for installation in public water mains. This product is intended for private use
in the home area and not for commercial or industrial purposes or for continuous circulating.
The pump is not suited to discharge saltwater, feces, inflammable, etching, explosive or other
hazardous liquids. Please observe the max. temperature of the liquids to be discharged stated
in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.

3. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate (Q )
max
Max. pressure
1)
Max. delivery height (H )
max
Max. submersion depth 
Max. size of the solids being pumped
Max. fluid temperature (T )
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
2)
Min. self-priming level (A)
2)
Min. suction level (B)
2)
Cut-in level (C)
2)
Cut-out level (D)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2)
The values between brackets refer to the illustrations given at the end of these operating instructions.

4. Scope of delivery

The scope of the delivery of this product includes:
One pump with connection cable, one connection port, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation", "Automation with special
accessories" and "How to order spare parts").
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.

5. Installation

5.1. General installation information
During the entire process of installation, the device must not be connected to the electrical
mains.
DRAIN 6000/36
230 V~ / 50 Hz
950 Watt
IPX8
41.91 mm (1¼"), male
6,000 l/h
3.4 bar
34 m
7 m
2 mm
35 °C
30, evenly distributed
10 m
H07RN8-F
8.9 kg
120 mm
27 mm
420 mm
230 mm
17 x 16 x 38.5 cm
30136
2
9 9