System - Axis Q1715 User Manual

AXIS Q1715 Block Camera
The web interface
• Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device
doesn't have internet access.
If you don't have a license key, go to axis.com/products/analytics. You need a license code and the Axis product serial
number to generate a license key.
• Activate license automatically: If the app requires a license, you need to activate it. Use this option if your device has
internet access. You need a license code to activate the license.
• Deactivate the license: Deactivate the license to replace it with another license, for example, when you change from a
trial license to a full license. If you deactivate the license, you also remove it from the device.
• Settings: Configure the parameters.
• Delete: Delete the app permanently from the device. If you don't deactivate the license first, it remains active.

System

Time and location
Date and time
The time format depends on the web browser's language settings.
Note
We recommend you synchronize the device's date and time with an NTP server.
Synchronization: Select an option for the device's date and time synchronization.
• Automatic date and time (manual NTS KE servers): Synchronize with the secure NTP key establishment servers
connected to the DHCP server.
-
• Automatic date and time (NTP servers using DHCP): Synchronize with the NTP servers connected to the DHCP server.
-
• Automatic date and time (manual NTP servers): Synchronize with NTP servers of your choice.
-
• Custom date and time: Manually set the date and time. Click Get from system to fetch the date and time settings
once from your computer or mobile device.
Time zone: Select which time zone to use. Time will automatically adjust to daylight saving time and standard time.
Note
The system uses the date and time settings in all recordings, logs, and system settings.
Device location
Enter where the device is located. Your video management system can use this information to place the device on a map.
• Latitude: Positive values are north of the equator.
• Longitude: Positive values are east of the prime meridian.
• Heading: Enter the compass direction that the device is facing. 0 is due north.
• Label: Enter a descriptive name for the device.
• Save: Click to save your device location.
Regional settings
Sets the system of measurement to use in all system settings.
Metric (m, km/h): Select for distance measurement to be in meters and speed measurement to be in kilometers per hour.
U.S. customary (ft, mph): Select for distance measurement to be in feet and speed measurement to be in miles per hour.
Manual NTS KE servers: Enter the IP address of one or two NTP servers. When you use two NTP servers,
the device synchronizes and adapts its time based on input from both.
Fallback NTP servers: Enter the IP address of one or two fallback servers.
Manual NTP servers: Enter the IP address of one or two NTP servers. When you use two NTP servers, the
device synchronizes and adapts its time based on input from both.
36