Table of Contents
Advertisement
Quick Links
Axis 0835-051: Q1765-60C - User Manual
Manufacturer: Axis Communications
Product Type: Network IP Bullet Camera
Manufacturer Part Number: 0835-051
Model #: Q1765-60C
General Information
UPC: 7331021050563
•
UNSPSC: 46171610
•
Color Supported: Monochrome
•
Image Sensor Type: RGB CMOS
•
Maximum Video Resolution: 1920 x 1080
•
Video Formats: H.264, MJPEG, MPEG-4 AVC
•
Related Links (Right click to open in new tab)
Visit the
0835-051 | Q1765-60C
View
over 1170 other Axis products
View list of all the
other manufacturers
# Require Multiple Quantities? Email us for Bulk Pricing
Scroll down to view the Axis 0835-051 | Q1765-60C User Manual
product page for detailed information
we carry
Advertisement
Table of Contents
Related Manuals for Axis Q1765-60C
Summary of Contents for Axis Q1765-60C
- Page 1 View over 1170 other Axis products View list of all the other manufacturers we carry # Require Multiple Quantities? Email us for Bulk Pricing Scroll down to view the Axis 0835-051 | Q1765-60C User Manual...
- Page 2 XF40-Q1765 Explosion-Protected Fixed Network Camera User Manual...
- Page 3 Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis This equipment has been tested using a shielded network cable (STP) Communications AB cannot be held responsible for any technical or...
- Page 4 Technology Equipment. • report problems to Axis support staff by logging in to your private If its connecting cables are routed outdoors, the product shall be support area grounded either through a shielded network cable (STP) or other •...
-
Page 5: Table Of Contents
About AXIS Media Control (AMC) ........ - Page 6 XF40-Q1765 Explosion-Protected Fixed Network Camera Table of Contents SD card slot ........... . Buttons .
-
Page 7: Safety Information
XF40-Q1765 Explosion-Protected Fixed Network Camera Safety information Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. -
Page 8: Hardware Overview
XF40-Q1765 Explosion-Protected Fixed Network Camera Hardware overview Hardware overview For specifications of the hardware components, see Technical specifications on page 52. Wiper Protective window Camera housing Camera Unit Status LED indicator MicroSD memory card slot Control button... -
Page 9: How To Access The Product
If you do not know the IP address, use AXIS IP Utility to locate the product on the network. For information about how to discover and assign an IP address, see the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/support... -
Page 10: How To Set The Root Password
3. Click OK. The password has now been configured. Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 47) or by resetting the product to factory default. - Page 11 2. Under Action Buttons, select Show manual trigger button. About the AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See About AXIS Media Control (AMC) on page 11 for more information. The toolbar displays the following buttons: The Play button connects to the Axis product and starts playing a media stream.
-
Page 12: About Media Streams
Note also that all multicast viewers count as one unicast viewer in the maximum total of 20 simultaneous connections. AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements. -
Page 13: Alternative Methods Of Accessing The Video Stream
XF40-Q1765 Explosion-Protected Fixed Network Camera About media streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: •... - Page 14 • The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
-
Page 15: How To Set Up The Product
How to set up the product How to set up the product The Axis product can be configured by users with administrator or operator rights. To open the product’s setup pages, click Setup in the top right-hand corner of the live view window. -
Page 16: Video
Use the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Height fields and click Apply. • When accessing the Live View page in Internet Explorer with AXIS Media Control (AMC) in Windows. Right-click in the image and select Pixel counter. Use the mouse to move and resize the rectangle. Image The default image settings can be configured under Video >... - Page 17 A low GOP-length value increases the video quality but requires more bandwidth. About H.264 profiles The Axis product supports the following H.264 profile(s): • Main: The Main profile uses CABAC and provides a better compression with maintained video quality. It requires a larger amount of processing power to decode than the Baseline profile.
-
Page 18: About Stream Profiles
ONVIF media profiles from this page. About camera settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. About image appearance To change Image Appearance go to the menus under Setup > Video > Camera Settings. - Page 19 Video White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light source from the drop-down list.
-
Page 20: About Overlays
XF40-Q1765 Explosion-Protected Fixed Network Camera Video For example, to get 30 fps, set Max shutter to 1/30. • Fixed to use a fixed shutter speed. Gain, measured in decibel (dB), is the amount of amplification applied to the image. A high gain may provide a better image in low light situations but will increase the amount of image noise. - Page 21 An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is first uploaded to the Axis product and then used to provide extra information or to mask a part of the image.
-
Page 22: About Privacy Masks
Privacy masks cannot be bypassed using the VAPIX® application programming interface (API). The Privacy Mask List (Video > Privacy Mask) shows all the masks that are currently configured in the Axis product and indicates if they are enabled. -
Page 23: How To Configure The Live View Window
Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See About AXIS Media Control (AMC) on page 11 . -
Page 24: About Ptz (Pan Tilt Zoom)
XF40-Q1765 Explosion-Protected Fixed Network Camera About PTZ (Pan Tilt Zoom) About PTZ (Pan Tilt Zoom) About preset positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists of the following values: •... - Page 25 XF40-Q1765 Explosion-Protected Fixed Network Camera About PTZ (Pan Tilt Zoom) If you set the focus window from the preset positions page, it is included in the settings for that preset. The focus window can be redefined for the preset, but it cannot be deleted unless the preset is deleted.
-
Page 26: About Detectors
XF40-Q1765 Explosion-Protected Fixed Network Camera About detectors About detectors About camera tampering Camera Tampering can generate an alarm when the camera is repositioned, or when the lens is covered, spray-painted or severely de-focused. To send an alarm, for example via email, an action rule must be set up. How to configure tampering detection 1. -
Page 27: About Applications
Manual installation — obtain the license key from the application vendor and upload the key to the Axis product To request a license, the Axis product serial number (S/N) is required. The serial number can be found on the product label and under System Options >... -
Page 28: About Events
How to set up motion detection and add a network share: 1. Go to Applications to start and configure AXIS Video Motion Detection. See the online help. 2. Go to System Options > Storage and set up the network share. See page 45. - Page 29 Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device.
-
Page 30: How To Add Recipients
Encrypted file transfer using HyperText Transfer Protocol Secure (HTTPS). Send Notification Specify login information for the HTTPS server and validate Send Video Clip the server’s certificate. If there is a proxy between the Axis product and the HTTPS server, also specify the proxy settings. -
Page 31: How To Create Schedules
Optionally, select Use encryption to send emails over an encrypted connection. The server certificate can be validated using the certificates available in the Axis product. For information on how to upload certificates, see About certificates on page 36. - Page 32 XF40-Q1765 Explosion-Protected Fixed Network Camera About events 3. Click OK. To use the recurrence in an action rule, first select Time from the Trigger drop-down list in the Action Rule Setup page and then select the recurrence from the second drop-down list. To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.
-
Page 33: About Recordings
Note The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is configured to use a time zone different from the local time zone, make sure to configure the Recording time filters according to the product’s time zone. -
Page 34: How To Export A Video Clip
About continuous recording The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage on page 43. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. -
Page 35: About Languages
About languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click the Upload Language button. -
Page 36: About System Options
IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering. - Page 37 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired protocol, in the address field in a browser, enter https:// for the HTTPS protocol and http:// for the HTTP protocol.
-
Page 38: Date & Time
Date & Time The Axis product’s date and time settings are configured under System Options > Date & Time. Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below). -
Page 39: Network
IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic. - Page 40 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/support Note •...
- Page 41 Host Name Configuration The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.
- Page 42 SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).
- Page 43 Note All AXIS Video MIB traps are enabled when SNMP v1/v2c traps are enabled. It is not possible to turn on or off specific traps. SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.
-
Page 44: Storage
To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted. - Page 45 If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product. To enable automatic formatting, follow these steps: 1. Open the Axis product’s webpages and go to Setup > System Options > Storage. 2. Click SD Card. 3. Under General Settings, select Autoformat to.
-
Page 46: Maintenance
The Axis product provides several maintenance functions. These are available under System Options > Maintenance. Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. -
Page 47: Support
System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information that can be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent log items. -
Page 48: How To Reset To Factory Default Settings
About system options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go to System Options > Advanced > File Upload. Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the selected user group (viewer, operator or administrator) for the uploaded file. -
Page 49: Troubleshooting
The latest version may contain a correction that fixes your particular problem. The current firmware version in the Axis product is displayed in the page Setup > Basic Setup and in Setup > About. -
Page 50: Symptoms, Possible Causes And Remedial Actions
Status indicator. 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/support Symptoms, possible causes and remedial actions Problems upgrading the firmware Firmware upgrade failure If the firmware upgrade fails, the product reloads the previous firmware. - Page 51 Check in the AMC Control Panel (H.264 tag) that video processing is not set to Decode only key frames. Lower the image resolution. The maximum frames per second is dependent on the utility frequency (60/50 Hz) of the Axis product. Video and image problems, general Image unsatisfactory Check the video stream and camera settings under Setup >...
- Page 52 XF40-Q1765 Explosion-Protected Fixed Network Camera Troubleshooting Video cannot be recorded Check that the SD card is not write protected (that is, read only). SD card cannot be mounted Reformat the SD card and then click Mount. NOTICE TICE TICE Formatting the card will remove all content, including all recordings, from the SD card.
-
Page 53: Technical Specifications
Resetting the product to factory default settings. See page 47. • Connecting to an AXIS Video Hosting System service. See page 39. To connect, press and hold the button for about 3 seconds until the Status LED flashes green. •... - Page 54 Heavy network utilization due to poor infrastructure affects the bandwidth. • Viewing on poorly performing client computers lowers perceived performance and affects frame rate. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.
- Page 55 User Manual Ver. M4.2 XF40-Q1765 Explosion-Protected Fixed Network Camera Date: February 2017 © Axis Communications AB, 2015 - 2017 Part No. 62009...