Technical Data - Dolmar PS-35 C Operator's And Safety Manual

Technical data

Stroke volume
Bore
Stroke
Max. power at speed
Max. torque at speed
Idling speed / max. engine speed with bar and chain
Coupling speed
Sound pressure level at the operator´s ear
according to ISO 22868
Carburetor
Ignition system
Spark plug
or spark plug
Electrode gap
Fuel consumption at max. load per ISO 7293
Specific consumption at max. load per ISO 7293
Fuel tank capacity
Chain oil tank capacity
Mixture ratio (fuel/two-stroke oil)
- when using DOLMAR High Performance oil
- when using other synthetic oils (oil quality must be JASO FC or ISO EGD)
Chain brake
Sprocket pitch
Number of teeth
Chain type
Pitch / gauge
Guide bar, length of a cut
Guide-bar type
Weight (fuel tank empty, without chain, guide bar and accessories) lbs
This chain saw is capable of severe kickback that coult result in serious injury to the user. Do not operate this chain
saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback.
Chain saws with significantly reduced kickback potential are available.
cu. in (cm)
3
inch (mm)
inch (mm)
hp / rpm
Nm /rpm
rpm
rpm
dB(A)
Type
Type
Type
Type
inch (mm)
kg/h
g/kWh
floz
floz
engages manually or in case of kickback
inch
Z
see the Extract from the spare-parts list
inch / (mm) 3/8 / 0,050 (1,3)
inch / (cm)
see the Extract from the spare-parts list
WARNING:
PS-35 C PS-35 C TLC
2.1 (35)
1.50 (38)
1.20 (30.6)
2.3 / 10.000
2.0 / 7.000
2.800 / 13.100
4.100
101,7
diaphragm carburator
electronic
NGK CMR6A
--
.023 (0,6)
0,68
500
13,5
9,5
50 : 1
50 : 1
3/8
6
/ 3/8 / 0,043 (1,1)
12, 14, 16 (30, 35, 40)
9.70 9.92
19