Technical Data; Denomination Of Components - Dolmar PS-220 TH Original Instruction Manual

Hide thumbs

Table of Contents

Available languages

Technical data

Stroke volume

Bore

Stroke

Max. power at speed

Max. torque at speed

Idling speed / max. engine speed with bar and chain

Coupling speed

Sound pressure level at the workplace L

Sound power level L

per ISO 22868

WA, Fl+Ra

Uncertainty for noise

Vibration acceleration a

per ISO 22867

w av

- Tubular handle

- Rear handle

Uncertainty for vibration

Carburetor (diaphragm carburetor)

Ignition system

Spark plug

Electrode gap

Fuel consumption at max. load per ISO 7293

Specific consumption at max. load per ISO 7293

Fuel tank capacity

Chain oil tank capacity

Mix ratio (fuel/two-stroke oil)

Chain brake

Chain speed (at racing speed)

Sprocket pitch

Number of teeth

Pitch / Driving element strength

Guide bar, length of a cut

Weight (fuel tank empty, without chain and guide bar)

1) Figures derived in equal part from idle, full-load, and top-speed operation.

2) Figures derived in equal part from full-load and racing speed.

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

• The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).