1. Manuals
  2. Brands
  3. Smithco Manuals
  4. Lawn and Garden Equipment
  5. Super Star FX 43-250-A
  6. Parts & service

Smithco Super Star FX 43-250-A Parts & Service

Hide thumbs
Table of Contents

Advertisement

Quick Links

Parts & Service
Super Star FX
43-250-A
SN: 1FX1001
November 2014
Product Support:
Hwy SS & Poplar Ave; Cameron WI 54822
1-800-891-9435
productsupport@smithco.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Super Star FX 43-250-A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smithco Super Star FX 43-250-A

Summary of Contents for Smithco Super Star FX 43-250-A

  • Page 1 Parts & Service Super Star FX 43-250-A SN: 1FX1001 November 2014 Product Support: Hwy SS & Poplar Ave; Cameron WI 54822 1-800-891-9435 productsupport@smithco.com...

  • Page 2: Table Of Contents

    CONTENTS Introduction ................... 1-3 Introduction ....................1 Safe Practices ..................2 Specifications .................... 3 Service ....................4-11 Maintenance ..................4-6 Service Chart .................... 7 End User's Service Chart................8 Adjustments ..................9-10 Storage ....................11 Diagrams.................... 12-15 Wiring Diagram ................. 12-13 Hydraulic Diagram ................

  • Page 3: Introduction

    State of California to cause cancer, birth defects, and other reproductive harm. All Smithco Smithco machines have a Serial Number and Model Number. Both numbers are needed when ordering Smithco Smithco Smithco parts. Refer to engine manual for placement of engine serial number.

  • Page 4: Safe Practices

    19. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase. 20. Use parts and materials supplied by SMITHCO only. Do not modify any function or part. These machines are intended for professional maintenance on golf courses, sports turf, and any other area maintained turf and related trails, paths and lots.

  • Page 5: Specifications

    SPECIFICATIONS SUPERSTAR FX WEIGHTS AND DIMENSIONS Length 64" (1.63 m) Width 57" (1.45 m) Height 47" (1.19 m) Wheel Base 41" (1.04 m) Weight 950 lbs. ( 451 kg) SOUND LEVEL At Ear Level 87 dB ENGINE Make Briggs and Stratton Vanguard Model# 356447 Type / Spec#...

  • Page 6: Service

    MAINTENANCE Before servicing or making adjustments to machine, stop engine and remove key from ignition. Use all procedures and parts prescribed by the manufacturer's. Read the engine manual. LUBRICATION Use No. 2 General purpose Lithium Base Grease and lubricate every 100 hours. The Super Star has three grease fittings.
  • Page 7 MAINTENANCE TIRE PRESSURE Caution must be used when inflating a low tire to recommended pressure. Over inflating can cause tires to explode. Tires should be 5 psi (0.34 bar). Improper inflation will reduce tire life considerably. ENGINE Change and add oil according to chart below. Do not overfill. Use a high quality detergent oil classified "For Service SJ or higher"...
  • Page 8 MAINTENANCE WHEEL MOUNTING PROCEDURE 1. Turn machine off and remove key. 2. Block one of the other wheels. 3. Loosen nuts slightly on wheel to be removed. 4. Jack up machine being careful not to damage underside of machine. 5. Remove nuts. Remove wheel. 5.

  • Page 9: Service Chart

    SERVICE CHART Before servicing or making adjustments to the machine, stop engine, set park break, block wheels and remove key from ignition. Follow all procedures and ONLY use parts prescribed by the manufacturer. Read the engine manual before maintenance. The suggested maintenance checklist is not offered as a replacement for the manufacturer’s engine manual but as a supplement.

  • Page 10: End User's Service Chart

    END USER’S SERVICE CHART Duplicate this page for routine use. For the week of: Maintence Check Item Tues. Wed. Thurs. Fri. Sat. Sun. Check the Safety Seat Switch Check Steering Operation Check the fuel level Check the engine oil level. Clean the air filter Clean the engine cooling fins.

  • Page 11: Adjustments

    ADJUSTMENTS RAKE LIFT CYLINDER Completely lower Rake Lift. Remove the clevis pin (A). Twist lift link- age (C) so clevis pin end of cylinder extension lines up with holes in attachment lift arm. Replace clevis and cotter pins. Raise and lower Rake Lift to check for proper clearance.
  • Page 12 ADJUSTMENTS (CONTINUED) PARK BRAKE The park brake is located on the right hand side of the machine and operates a brake on the right rear wheel. Push lever forward to dis- engage and pull back to engage. To adjust turn the knob on the end of the handle. For further adjust- ment you may turn the yokes (A) clockwise to tighten and counter clockwise to loosen.

  • Page 13: Storage

    WHEEL CREEP WHEEL ‘CREEP’ ADJUSTMENT ‘Creep’ is when engine is running and hydrostatic transmission is in neutral, but due to inadequate alignment, wheels still move. Do the following procedures to stop this motion. 1. Lift up and support machine so all wheels are off the ground and can turn freely.

  • Page 14: Diagrams

    WIRING DRAWING Color Code Chart Blue Brown Yellow Green Orange Black Purple White...

  • Page 15: Parts

    WIRING PARTS LIST REF # PART # DESCRIPTION QUANTITY 50-359 Warning Indicator Lights 12-017 Hour Meter 15-725 Mount Panel End 15-727 Switch Actuator, no light 15-782 Rocker Switch, Unlit 34-201 Lights (Optional) 43-505 Lights Wire Harness 13-488 Ignition Switch 8975 Circuit Breaker, 30AMP 8977 Breaker Boot...

  • Page 16: Hydraulic Diagram

    HYDRAULIC DRAWING...
  • Page 17 HYDRAULIC PARTS LIST REF # PART # DESCRIPTION QUANTITY 34-105 Oil Cooler 43-255 Hydraulic Hose 43-258 Hydraulic Hose 43-260 Hydraulic Hose 43-259 Hydraulic Hose 76-238 Front Wheel Motor 43-257 Hydraulic Hose 34-103 Orbitrol 43-256 Hydraulic Hose 43-253 Hydraulic Hose 13-729 2 - Bank Hydraulic Valve 78-454 Offset Valve Handle...

  • Page 18: Main Frame

    MAIN BODY DRAWING...
  • Page 19 MAIN BODY PARTS LIST REF# PART# DESCRIPTION QUANTITY 14-269 Adjustable Low Back Seat 42-834 Air Cleaner 42-834-01 Band 42-834-02 Hood 43-244 Control Panel 43-234 Decal, Dash Panel 42-005 Oil Tank 13-586-03 Filler Neck 13-718 Steering Wheel, 13" 13-726 Center Cap 76-362 Tilt Steering Mechanism 76-364...
  • Page 20 FRONT FORK DRAWING...

  • Page 21: Front Fork

    FRONT FORK PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-726 Center Cap 27-077 Decal, Smithco Round HNTL-58-11 Lock Nut, - 11 13-718 Steering Wheel 13" 76-364 Tilt Steering Boot (comes with 76-362) 76-362 Tilt Steering Mechanism HWK-316-075 Woodruff Key 16 x...

  • Page 22: Foot Pedal Linkage

    LINKAGE DRAWING CONTROL PANEL DRAWING...
  • Page 23 LINKAGE PARTS LIST REF# PART# DESCRIPTION QUANTITY 43-268 Swash Arm HRP-14-100 Roll Pin, 43-274 Control Link HN-516-24 Hex Nut, - 24 42-590 Mud Guard 18-441 Ball Joint, - 24 HN-516-24 Nut, - 24 HW-516 Flat Washer, 42-813 Foot Pedal HG-14-28-180 Grease Fitting, - 28 x 180°...

  • Page 24: Fuel Tank

    GAS TANK DRAWING...
  • Page 25 GAS TANK PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-248 Battery Hold-down 15-020 Grip HB-516-18-225 Bolt - 18 x 2 HW-516 Washer HNFL-516-18 Flange Whiz Lock Nut - 18 HB-38-16-125 Hex Bolt, - 16 x 1 HNFL-38-16 Flange Lock Nut, - 16 HB-516-18-225 Bolt - 18 x 2...

  • Page 26: Oil Tank

    OIL TANK DRAWING...
  • Page 27 OIL TANK PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-005 Oil Tank 13-747 Filler Breather 13-586-01 Cap Gasket 13-586-02 Bottom Gasket 18-240 Adapter 18-072 45° Elbow 23-126 #6 Plug HB-14-20-075 Bolt - 20 x HW-14 Washer HWL-14 Lock Washer 43-246 Oil Tank Bracket HB-516-18-225 Bolt - 18 x 2...
  • Page 28 PUMP AND ENGINE DRAWING Solenoid Mounts Here...

  • Page 29: Pump And Engine

    PUMP AND ENGINE PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-353 Belt Guard 78-274 Cage Nut HB-14-20-075 Hex Bolt, -20 x HWL-14 Lock Washer, 42-357 Belt Stop 42-327 Tensioner 16-990 Spacer HKSQ-14-100 Machine Key HB-14-20-125 Bolt - 20 x 1 4 (comes with 42-245 & 42-246) (3 per hub) HW-14 Lockwasher...
  • Page 30 PUMP AND ENGINE DRAWING Solenoid Mounts Here...
  • Page 31 PUMP AND ENGINE PARTS LIST REF# PART# DESCRIPTION QUANTITY HHP-18 Bridge Pin 18-174 Elbow 90° 18-185 Elbow 42-797 Variable Pump (3WD) HNFL-12-13 Flange Whiz Lock Nut 42-246 HWK-316-075 Woodruff Key 42-361 Tensioner Spacer HB-38-16-275 Hex Bolt, -16 x 2 HNFL-38-16 Flange Whiz Lock Nut, HW-38 Flat Washer,...

  • Page 32: Engine Drawing

    ENGINE DRAWING...
  • Page 33 ENGINE PARTS LIST REF # PART # DESCRIPTION QUANTITY 45-118 Throttle 34-105 Oil Cooler 43-272 Upper Cooler Mount HB-14-20-075 Hex Bolt, - 20 x HNFL-14-20 Flange Whiz Lock Nut, - 20 42-275 Bottom Cooler Bracket 42-269 Engine Plate HB-516-18-225 Hex Bolt, - 18 x 2 HNFL-516-18 Flange Whiz Lock Nut,...

  • Page 34: Rear Axle

    REAR AXLE DRAWING...
  • Page 35 REAR AXLE PARTS LIST REF# PART# DESCRIPTION QUANTITY 60-106 Brake Lever 43-271 Brake Relay Mount HB-516-18-150 Hex Bolt, - 18 x 1 HNFL-516-18 Flange Whiz Lock Nut, - 18 HW-516 Flat Washer, 11-100 Linkage Yoke HB-516-18-150 Hex Bolt, - 18 x 1 HNFL-516-18 Flange Whiz Lock Nut - 18...

  • Page 36: Rake Lift

    RAKE LIFT DRAWING...
  • Page 37 RAKE LIFT PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-150 Clevis Pin, HHP-18 Bridge Pin, 18-168 90° Elbow 43-150 Hydraulic Cylinder(rear rake lift) HNJ-58-18 Jam Nut, - 18 43-138 Lift Linkage HCP-34-200 Clevis Pin HHP-.177 Bridge Pin 34-220 Pivot Bracket - RH 33-086 Flange Bushing 15-019...

  • Page 38: 2-Bank Hydraulic Valve

    13-729 2-BANK HYDRAULIC VALVE DRAWING...
  • Page 39 13-729 2-BANK HYDRAULIC VALVE PARTS LIST REF # PART # DESCRIPTION QUANTITY 78-415-01 Body (complete with spacer and check valve) 78-415-02 Spool HDM10 78-417-01 Tapered Knob 78-454 Bent Handle 78-415-09 Lever Group HDS11 78-415-10 Metric Socket Screw M5 x .8 x 45 78-415-04 Flanged Washer HDM10 78-415-03...

  • Page 40: Front Wheel Motor

    76-238 FRONT WHEEL MOTOR DRAWING (14.5 CI)
  • Page 41 76-238 FRONT WHEEL MOTOR PARTS LIST (14.5 CI) REF# PART# DESCRIPTION QUANTITY Water & Dirt Seal 2† 13-615-05 Service Housing Assembly Inner Seal 4† 13-032-27 Thrust Bearing 5† 13-032-28 Inner Bearing 13-032-29 Thrust Bearing 76-238-03 Drive Link Ring Seal 13-032-31 Manifold 13-032-32 Commulator Assembly (matched...

  • Page 42: Rear Wheel Motor

    REAR WHEEL MOTOR (7.5 C.I.) DRAWING...
  • Page 43 REAR WHEEL MOTOR (7.5 C.I.) PARTS LIST REF# PART# DESCRIPTION QUANTITY Water & Dirt Seal Service Housing Assembly Inner Seal 13-032-27 Thrust Bearing 13-032-28 Inner Bearing 13-032-29 Thrust Bearing 13-615-03 Drive Link Ring Seal 13-032-31 Manifold 13-032-32 Commulator Assembly (matched set) End Cover 13-615-01...
  • Page 44 42-797 VARIABLE PUMP DRAWING...

  • Page 45: Variable Pump

    42-797 VARIABLE PUMP PARTS LIST REF# PART# DESCRIPTION QUANTITY 10-117-01 End cap 14-263 Implement relief spring 42-003-16 Cylinder block kit Piston assembly Slipper retainer Cylinder block Swashplate 14-114 Thrust plate Charge pump housing assembly 42-003-10 Ball bearing Shaft O-ring 14-217 Roller bearing Plug O-ring...

  • Page 46: Decals

    Bottom Seat Panel 25-298 Decal, Warning Hot Bottom Seat Panel. Oil Filter Bracket 25-337 Decal, Speed Boss Hang from Steering 25-373 Decal, Smithco Star Nose Cone 25-349 Decal, Foot Pedal Right Side Nose Cone 25-352 Decal, By-Pass Valve Hang Tag...

  • Page 47: Quick Reference

    QUICK REFERENCE REPLACEMENT PARTS REPLACEMENT FILTERS 23-031 Hydraulic Oil Filter 15-165-01 Air Filter Element with Pre-Cleaner Briggs and Stratton# 5050 42-076-03 Air Filter Element Fender Mounted 42-834-03 Safety Filter Element Fender Mounted 50-403 Fuel Filter 13-531 Engine Oil Filter Briggs and Stratton# 492932 18-462 Oil Drain Valve SEAL KITS...
  • Page 48 ACCESSORIES Front Mounted Implements ................. A 13-731 Single Bank Valve ................2 43-003 40" Hydraulic Sand Plow ..............4 43-013 40" Hydraulic Angle Sand Plow ............. 8 42-011 40" Manual Sand Plow(Steel & Aluminum) ........12 42-136 60" Manual Sand Plow ..............14 42-460 40"...
  • Page 49 13-731 SINGLE BANK HYDRAULIC VALVE DRAWING...
  • Page 50 13-731 SINGLE BANK HYDRAULIC VALVE PARTS LIST REF # PART # DESCRIPTION QUANTITY 13-731-01 Actuator Housing Assembly 13-731-02 Valve Plug 3*† 78-415-03 O-Ring Seal 4*† 78-415-05 Spacer 78-415-04 Flanged Washer HDM10 13-731-03 Spool 78-415-11 Positioner 78-415-08 Plug 78-415-09 Lever Group HDS11 78-415-10 Metric Socket Screw M5 x .8 x 45 13-731-04...
  • Page 51 43-003 HYDRAULIC SAND PLOW DRAWING HYDRAULIC VALVE PLUMBING DRAWING...
  • Page 52 43-003 HYDRAULIC SAND PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-38-16-350 Bolt, - 16 x 3 (Part of machine) HW-38 Washer, HNTL-38-16 Lock Nut, - 16 18-188 45° Elbow 78-417 Straight Handle Kit HB-14-20-200 Bolt, - 20x 2 HNFL-14-20 Flange Whiz-Lock Nut, - 20 13-731 Single Bank Hydraulic Valve...
  • Page 53 43-003 HYDRAULIC SAND PLOW DRAWING HYDRAULIC VALVE PLUMBING FOR 43-500 DIESEL...

  • Page 54: Single Bank Valve

    43-003 HYDRAULIC SAND PLOW INSTRUCTIONS 1. Assemble Pusher Bars (Ref # 22 and 25) to Plow Blade (Ref # 16) using one -16 x 1 Bolt (Ref # 19) and -16 x 3 Bolt (Ref #21) per Pusher Bar. There are 2 holes to bolt (Ref # 19) hardware in. Using hole closest to the blade will result in a shallow cut, whereas using the hole furthest from the blade will result in a deeper cut.
  • Page 55 43-013 HYDRAULIC ANGLE SAND PLOW DRAWING HYDRAULIC VALVE PLUMBING DRAWING...
  • Page 56 43-013 HYDRAULIC ANGLE SAND PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-38-16-350 Bolt, - 16 x 3 (Part of machine) HW-38 Washer, HNTL-38-16 Lock Nut, - 16 18-188 45° Elbow 78-417 Straight Handle Kit HB-14-20-200 Bolt, - 20x 2 HNFL-14-20 Flange Whiz-Lock Nut, - 20 13-731...
  • Page 57 43-013 HYDRAULIC ANGLE SAND PLOW DRAWING HYDRAULIC VALVE PLUMBING DRAWING A-10...
  • Page 58 43-013 HYDRAULIC ANGLE SAND PLOW INSTRUCTIONS 1. Assemble Pusher Bars (Ref # 22 and 25) to Plow Blade (Ref # 16) using one -16 x 1 Bolt (Ref # 19) and -16 x 2 Bolt (Ref #21) per Pusher Bar. There are 2 holes to bolt (Ref # 19) hardware in. Using hole closest to the blade will result in a shallow cut, whereas using the hole furthest from the blade will result in a deeper cut.
  • Page 59 42-011 -AB ALUMINUM SAND PLOW DRAWING 42-011 -SB STEEL SAND PLOW DRAWING A-12...
  • Page 60 42-011 SAND PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-346 Lift Assembly HNTL-12-13 Lock Nut - 13 HB-38-16-350 Bolt - 16 x 3 (part of main frame) HWL-38 Lock Washer HN-38-16 - 16 HCP-12-150 Clevis Pin 27-049 Left Pusher Bar HB-38-16-250 Bolt - 16 x 2...
  • Page 61 42-136 60" SAND PLOW DRAWING A-14...
  • Page 62 42-136 60" SAND PLOW PART LIST REF# PART# DESCRIPTION QUANTITY 42-092 Lift Assembly (includes Ref# 20) HNTL-12-13 Lock Nut - 13 HB-38-16-350 Bolt - 16 x 3 (part of main frame) HWL-38 Lock Washer HN-38-16 - 16 HCP-12-150 Clevis Pin 27-049 Left Pusher Bar HB-38-16-300...
  • Page 63 42-460 40" ANGLE PLOW A-16...
  • Page 64 40" ANGLE PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-346 Lift Assembly HNTL-12-13 Lock Nut - 13 HB-12-13-200 Bolt - 13 x 2 HMB-12-14 Machine Bushing x 14GA 80-006 Rod End HNJ-12-20 Jam Nut - 20 27-073 Lift Rod 27-017 Aluminum Sand Plow Blade 42-495 Pivot Frame...
  • Page 65 42-490 60" ANGLE PLOW A-18...
  • Page 66 60" ANGLE PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-346 Lift Assembly HNTL-12-13 Lock Nut - 13 HB-12-13-200 Bolt - 13 x 2 HMB-12-14 Machine Bushing x 14GA 80-006 Rod End HNJ-12-20 Jam Nut - 20 27-073 Lift Rod 35-012 Aluminum Sand Plow Blade 42-495 Pivot Frame...
  • Page 67 42-800 ROLL OVER PROTECTION A-20...
  • Page 68 42-800 ROP REF# PART # DESCRIPTION QUANTITY 76-198-03 Seat belt HB-716-14-100 Bolt - 14 x 1 HB-716-14-125 Bolt - 14 x 1 HNTL-716-14 Lock Nut - 14 42-802 Right Seat belt Bracket 42-803 Left Seat Belt Bracket 42-801 ROPS Bar INSTALLATION INSTRUCTIONS The Following ROP instructions apply to all Super Star Machines.
  • Page 69 42-837 LIGHT KIT FOR MACHINES WITH ROCKER SWITCHES REF# PART# DESCRIPTION QUANTITY 17-537 Square U-bolt 12-198 Light Bar 34-201 Light 42-800 ROPS 43-505 Light Wire Harness (plugs into switch wire harness) A-22...
  • Page 70 ACCESSORIES Front Mounted Implements ................A 13-731 Single Bank Valve ................2 43-003 40" Hydraulic Sand Plow ..............4 43-013 40" Hydraulic Angle Sand Plow ............8 42-011 40" Manual Sand Plow(Steel & Aluminum) ........12 42-136 60" Manual Sand Plow ..............14 42-460 40"...

  • Page 71: Adjustable Disc Edger

    42-223 ADJUSTABLE DISC EDGER DRAWING...
  • Page 72 42-223 ADJUSTABLE DISC EDGER PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-203 Attachment Lift Assembly HB-38-16-125 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut HB-38-16-150 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 HB-12-13-150 Bolt - 13 x 1 HW-12 Washer...
  • Page 73 42-750 CART PATH AND SIDEWALK EDGER DRAWING...
  • Page 74 42-750 CART PATH AND SIDEWALK EDGER PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-200 Clevis Pin, HHP-.177 Bridge Pin, .177 x 3.75 HCP-58-250 Clevis Pin, 42-203 Attachment Lift Assembly 42-758 Brush 42-754 Edger Mount HB-38-16-125 Bolt, -16 x 1¼ HNFL-38-16 Flange Whiz-Lock Nut, HW-38 Flat Washer, HG-14-28-180...
  • Page 75 42-287 EDGER KIT WITH CASTOR WHEELS DRAWING...
  • Page 76 42-287 EDGER KIT WITH CASTOR WHEELS PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-38-16-100 Bolt - 16 x 1 HNFL-38-16 Flange Whiz Lock Nut 42-203 Attachment Lift Assembly 42-293 Left Castor Bracket 18-035 Flange Bushing (part of 42-292) HMB-100-10 Machine Bushing 1 x 10GA 42-539 Lynch Pin HMB-100-14...

  • Page 77: 43-130 Weed Cultivator

    43-130 WEED CULTIVATOR...
  • Page 78 43-130 WEED CULTIVATOR REF# PART # DESCRIPTION QUANTITY 43-131 Attachment Lift Assembly HB-38-16-125 Bolt, - 16 x 1 HNFL-38-16 Flange Nut, - 16 13-096 Blade Assembly HCP-12-200 Clevis Pin HHP-18 Bridge Pin HCP-58-250 Clevis Pin...

  • Page 79: Sand Cultivator

    42-008 SAND CULTIVATOR DRAWING B-10...
  • Page 80 42-008 SAND CULTIVATOR PARTS LIST REF# PART# DESCRIPTION HCP-58-175 Clevis Pin Hydraulic Cylinder 18-168 90° Elbow 42-217 Cylinder Mount HB-12-13-500 Bolt - 13 x 5 HNTL-12-13 Lock Nut - 13 42-015 Attachment Mount HHP-18 Bridge Pin HB-38-16-125 Bolt - 16 x 1 HNTL-38-16 Lock Nut - 16...
  • Page 81 42-340 SAND CULTIVATOR WITH SPRING TINES DRAWING B-12...
  • Page 82 42-340 SAND CULTIVATOR WITH SPRING TINES PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-177 Spring Holder HB-516-18-100 Hex Bolt - 18 x 1 42-122 Rake Spring HNTL-38-16 Lock Nut - 16 HW-38 Flat Washer HNTL-516-18 Lock Nut - 18 HB-38-16-100 Hex Bolt - 16 x 1 HHP-18 Bridge Pin...
  • Page 83 42-341 FIELD SCARIFIER WITH TINES AND CASTOR WHEELS DRAWING B-14...
  • Page 84 42-341 FIELD SCARIFIER WITH TINES AND CASTOR WHEELS PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-202 Tire & Wheel 42-204 Castor Fork 42-177 Spring Holder HB-516-18-100 Hex Bolt - 18 x 1 HNTL-12-13 Lock Nut ½ - 13 33-338 Axle Bearing 42-122 Rake Spring HB-12-13-600...
  • Page 85 42-010 CONSTRUCTION LEVELING BLADE DRAWING B-16...

  • Page 86: Construction Leveling Blade

    42-010 CONSTRUCTION LEVELING BLADE PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-12-13-500 Bolt - 13 x 5 HNTL-12-13 Lock Nut - 13 42-015 Attachment Mount 42-203 Attachment Lift HB-38-16-100 Bolt - 16 x 1 HNTL-38-16 Lock Nut - 16 HCP-12-200 Clevis Pin HHP-18 Bridge Pin HCP-58-250...
  • Page 87 42-210 GRADER BLADE DRAWING 42-210 GRADER BLADE MOUNT DRAWING B-18...

  • Page 88: Grader Blade Kit

    42-210 GRADER BLADE PARTS LIST REF# PART# DESCRIPTION HHP-18 Bridge Pin 42-207 Grader Blade HBFL-516-18-075 Flange Bolt, - 18 x HNFL-516-18 Flange Whiz-Loc Nut, - 18 (not illustrated) 42-386 Grader Blade Mount 42-210 GRADER BLADE INSTALLATION INSTRUCTIONS 1. Install Grader Blade (Ref 2) onto Attachment Lift by sliding tabs onto clevis pins and secure with Bridge Pins (Ref 1).

  • Page 89: Infield Scarifier(Vertical Blades)

    42-178 INFIELD SCARIFIER WITH VERTICAL BLADES DRAWING B-20...
  • Page 90 42-178 INFIELD SCARIFIER WITH VERTICAL BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-203 Attachment Lift Assembly HB-38-16-100 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 42-205 Left Castor Wheel Bracket 10-025 Bushing (part of 42-205) 42-215 Short Spacer 42-214 Long Spacer...
  • Page 91 42-178 SCARIFIER MOUNTING DRAWING B-22...
  • Page 92 42-178 SCARIFIER MOUNTING PARTS LIST REF# PART# DESCRIPTION QUANTITY HHP-18 Bridge Pin 10-135 Hydraulic Cylinder (part of machine) HCP-58-175 Clevis Pin HB-12-13-500 Bolt - 13 x 5 HNTL-12-13 Lock Nut - 13 HCP-12-200 Clevis Pin 18-154 Rod End (part of machine) 42-217 Cylinder Mount (part of machine)
  • Page 93 42-179 INFIELD SCARIFIER WITH CHISEL BLADES DRAWING B-24...
  • Page 94 42-179 INFIELD SCARIFIER WITH CHISEL BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-203 Attachment Lift Assembly HB-38-16-125 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 42-205 Left Castor Wheel Bracket 10-025 Bushing (part of 42-205) 42-215 Short Spacer 42-214 Long Spacer...
  • Page 95 42-179 SCARIFIER MOUNTING DRAWING B-26...
  • Page 96 42-179 SCARIFIER MOUNTING PARTS LIST REF# PART# DESCRIPTION QUANTITY HHP-18 Bridge Pin 10-135 Hydraulic Cylinder (part of machine) HCP-58-175 Clevis Pin HB-12-13-500 Bolt - 13 x 5 HNTL-12-13 Lock Nut - 13 HCP-12-200 Clevis Pin 18-154 Rod End (part of machine) 42-217 Cylinder Mount (part of machine)

  • Page 97: Scarifier W/ Vertical Blades

    42-285 SCARIFIER WITH VERTICAL BLADES B-28...
  • Page 98 42-285 SCARIFIER WITH VERTICAL BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-203 Attachment Lift Assembly HB-38-16-100 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 42-288 Left Castor Wheel Bracket 10-025 Bushing (part of 42-288) 42-215 Short Spacer 42-214 Long Spacer HMB-34-14...
  • Page 99 42-285 SCARIFIER WITH VERTICAL BLADES MOUNTING DRAWING B-30...
  • Page 100 42-285 SCARIFIER WITH VERTICAL BLADES MOUNTING PARTS LIST REF# PART# DESCRIPTION QUANTITY HHP-18 Bridge Pin Hydraulic Cylinder (part of machine) HCP-58-175 Clevis Pin HB-12-13-500 Bolt - 13 x 5 (part of machine) HNTL-12-13 Lock Nut - 13 (part of machine) HCP-12-175 Clevis Pin 18-154...
  • Page 101 43-011 NAIL SCARIFIER WITH CASTOR WHEELS DRAWING B-32...
  • Page 102 43-011 NAIL SCARIFIER WITH CASTOR WHEELS PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-200 Clevis Pin, ½ x 2 HHP-18 Bridge Pin, 43-171 Nail Scarifier Frame 10-025 Flange Bushing (Part of 43-171) HG-14-28-180 Grease Fitting, - 28 x 180° (Part of 43-171) HMB-34-14 Machine Bushing, ¾...

  • Page 103: Warranty

    ACCESSORIES Front Mounted Implements ................A 13-731 Single Bank Valve ................2 43-003 40" Hydraulic Sand Plow ..............4 43-013 40" Hydraulic Angle Sand Plow ............8 42-011 40" Manual Sand Plow(Steel & Aluminum) ........12 42-136 60" Manual Sand Plow ..............14 42-460 40"...
  • Page 104 42-391Q 72"(183CM) P TOURNAMENT RAKE DRAWING RUSH...
  • Page 105 42-391Q 72"(183CM) P TOURNAMENT RAKE PARTS LIST RUSH REF# PART# DESCRIPTION QUANTITY 42-489 Tip Guard 42-397 Outside Brush Arm, LH HSTP-516-18-100 Phillip Truss Head Screw, - 18 x 1 HNFL-516-18 Flange Whiz-Loc Nut, - 18 11-055 Compression Spring HB-38-16-250 Hex Bolt, - 16 x 2 HW-38 Flat Washer,...
  • Page 106 42-391Q 72"(183CM) P TOURNAMENT RAKE DRAWING RUSH Fig. 1 Fig. 2 Fig. 3...
  • Page 107 TOURNAMENT RAKE ASSEMBLY INSTRUCTIONS RUSH Your P TOURNAMENT RAKE comes mostly assembled. RUSH 1. Before assembly please note the two Brush/Finish Blade Assemblies (Refs A & C in Fig.1) that are mounted on the outside (RH & LH) have flat washers that are between the Brush Arms (Refs 2 & 21) and the Brush Arm Mount (Ref 6).
  • Page 108 42-392Q 84"(213CM) P TOURNAMENT RAKE DRAWING RUSH...
  • Page 109 42-392Q 84"(213CM) P TOURNAMENT RAKE PARTS LIST RUSH REF# PART# DESCRIPTION QUANTITY 42-489 Tip Guard 42-397 Outside Brush Arm, LH HSTP-516-18-100 Phillip Truss Head Screw, - 18 x 1 HNFL-516-18 Flange Whiz-Loc Nut, - 18 11-055 Compression Spring HB-38-16-250 Hex Bolt, - 16 x 2 HW-38 Flat Washer,...
  • Page 110 42-392Q 84"(213CM) P TOURNAMENT RAKE DRAWING RUSH Fig. 1 Fig. 2 Fig. 3...
  • Page 111 TOURNAMENT RAKE ASSEMBLY INSTRUCTIONS RUSH Your P TOURNAMENT RAKE comes mostly assembled. RUSH 1. Before assembly please note the two Brush/Finish Blade Assemblies (Refs A & C in Fig.1) that are mounted on the outside (RH & LH) have flat washers that are between the Brush Arms (Refs 2 & 21) and the Brush Arm Mount (Ref 6).
  • Page 112 42-130Q 84" (213CM) MILD STEEL TOURNAMENT RAKE DRAWING C-10...
  • Page 113 42-130Q 84" (213CM) MILD STEEL TOURNAMENT RAKE PARTS LIST REF# PART# DESCRIPTION QUANTITY HSTP-516-18-100 Phillips Machine Screw - 18 x 1 HNFL-516-18 Flange Loc-Nut - 18 42-135 Finishing Blades HSTP-516-18-075 Phillips Machine Screw - 18 x HNFL-516-18 Flange Loc-Nut - 18 42-111 Left Outside Mount 42-102...
  • Page 114 42-130Q 84" (213CM) MILD STEEL TOURNAMENT RAKE DRAWING C-12...
  • Page 115 RAKE ASSEMBLY INSTRUCTIONS 1. Bolt rake spring (Ref 18) to rake frames (Ref 5) using hardware (Ref 14). Leave the two outside holes on right, left, and center rake open. 2. Attach rubber bumper (Ref 22) using cap nut and washer (Ref# 8). Attach rubber grommeta (Ref 10)to inside mounts (Ref 11 &...
  • Page 116 42-132Q 72"(183CM) MILD STEEL TOURNAMENT RAKE DRAWING C-14...
  • Page 117 42-132Q 72"(183CM) MILD STEEL TOURNAMENT RAKE PARTS LIST REF# PART# DESCRIPTION QUANTITY HSTP-516-18-100 Phillips Machine Screw - 18 x 1 HNFL-516-18 Flange Loc-Nut - 18 42-170 Finishing Blades HSTP-516-18-075 Phillips Machine Screw - 18 x HNFL-516-18 Flange Loc-Nut - 18 42-111 Left Outside Mount 42-140...
  • Page 118 42-132Q 72"(183CM) MILD STEEL TOURNAMENT RAKE DRAWING C-16...
  • Page 119 RAKE ASSEMBLY INSTRUCTIONS 1. Bolt rake spring (Ref 18) to rake frames (Ref 5) using hardware (Ref 14). Leave the two outside holes on right, left, and center rake open. 2. Attach rubber bumper (Ref 22) using cap nut and washer (Ref# 8). Attach rubber grommets (Ref 10)to inside mounts (Ref 11 &...
  • Page 120 13-438Q RAKE ASSEMBLY WITH FINISHING BLADES DRAWING C-18...
  • Page 121 13-438Q RAKE ASSEMBLY WITH FINISHING BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-441 Right Rake HMB-58-14 Machine Bushing x 14GA HNCL-58-11 Lock Nut - 11 HMB-12-14 Machine Bushing x 14GA HP-18-100 Cotter Pin 13-753 Center Rake 13-443 Finishing Blade 13-439 Left Rake Rake teeth 13-442...
  • Page 122 13-758 MAX FLEX SAND RAKE C-20...
  • Page 123 13-758 MAX FLEX SAND RAKE REF# PART# DESCRIPTION QUANTITY HB-58-11-400 Bolt, - 11 x 4 HMB-58-14 Machine Bushing, x 14GA HNCL-58-11 Lock Nut, - 11 43-145 Drawbar HCP-12-150 Clevis Pin, HP-18-100 Cotter Pin, 76-275 Spacer 13-762 Right Rake 13-759 Grooming Blade HB-516-18-075 Bolt, - 18 x...
  • Page 124 13-740 SAND RAKE BRUSH KIT DRAWING For use with 42-130 C-22...
  • Page 125 13-740 SAND RAKE BRUSH KIT PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-738 Brush, 89 x 11 13-737 Brush Channel 13-739 Brush Track HB-14-20-075 Bolt - 20 x HNFL-14-20 Flange Whiz-Lock Nut - 20 13-681 Mounting Brackets HB-14-20-150 Bolt - 20 x 1 HNFL-14-20 Flange Whiz-Lock Nuts - 20...
  • Page 126 13-684 SAND RAKE BRUSH KIT DRAWING For use with 13-438 HOLE LOCATION C-24...
  • Page 127 13-684 SAND RAKE BRUSH KIT PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-683 Brush Track 13-682 Brush 77 x 11 13-688 Brush Channel HB-14-20-075 Bolt - 20 x HNFL-14-20 Flange Whiz-Lock Nut - 20 13-681 Mounting Brackets HB-14-20-150 Bolt - 20 x 1 HNFL-14-20 Flange Whiz-Lock Nuts - 20...

  • Page 128: 13-298Q Fan Rake

    13-298Q FAN RAKE ATTACHMENT DRAWING 13-319-KFAN RAKE KIT DRAWING C-26...

  • Page 129: Fan Rake Kit

    13-298Q FAN RAKE ATTACHMENT PARTS LIST REF# PART# DESCRIPTION QUANTITY 43-153 Frame HB-14-20-200 Bolt - 20 x 2 13-310 Rake HNCL-14-20 Center Lock Nut - 20 INSTALLATION INSTRUCTIONS 1. Assemble the five rakes (Ref 3) to the frame using the bolt and center lock nuts (Ref 2 and 4). Slide the fan rake assembly under the rear of the trap rake to the hitch.
  • Page 130 26-007Q PROFESSIONAL INFIELD FINISHER DRAWING C-28...
  • Page 131 26-007Q PROFESSIONAL INFIELD FINISHER PARTS LIST REF# PART# DESCRIPTION QUANTITY 26-045 Leveling Screen HNCL-58-11 Center Lock Nut - 11 43-145 Drawbar HB-58-11-300 Bolt - 11 x 3 INSTALLATION INSTRUCTIONS The Professional Field Finisher is used for smoothing and leveling fields to professional standards. 1.
  • Page 132 43-002Q FLEX ACTION FIELD FINISHER BRUSH DRAWING WITH C-30...
  • Page 133 43-002Q FLEX ACTION FIELD FINISHER BRUSH PARTS LIST WITH REF# PART# DESCRIPTION QUANTITY 11-040 Spacer, " HW-58 Washer, 26-049 Mounting Bar HP-18-100 Cotter Pin, 26-048 Flail Bar Strap HB-38-16-100 Bolt -16 x 1 HNCL-38-16 Center Lock Nut HHP-18 Bridge Pin, 43-146 Frame 18-297...
  • Page 134 43-002 Q FLEX ACTION FIELD FINISHER BRUSH DRAWING WITH C-32...
  • Page 135 43-002Q FLEX ACTION FIELD FINISHER BRUSH INSTRUCTIONS WITH ASSEMBLY INSTRUCTIONS 1. Install flail bar strap (Ref 4) to center of mounting bar (Ref 3) with chain on top of flail bar strap and mount- ing bar bent away from you. Apply a light coat of lubricant to overall length of mounting bar. 2.

  • Page 136: 26-008Q Flex Action Field Finisher

    26-008Q FLEX ACTION FIELD FINISHER DRAWING C-34...
  • Page 137 26-008Q FLEX ACTION FIELD FINISHER PARTS LIST REF# PART# DESCRIPTION QUANTITY 11-040 Spacer " HW-58 Washer 26-049 Mounting Bar 26-048 Flail Bar Strap HB-38-16-100 Bolt - 16 x 1 HNCL-38-16 Center Lock Nut - 16 HHP-18 Bridge Pin 43-146 Frame 18-297 Cap Plug HMB-58-14...

  • Page 138: Finishing Brush

    43-043 FINISHING BRUSH KIT DRAWING HOLE LOCATION C-36...
  • Page 139 43-043 FINISHING BRUSH KIT PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-682 Brush, 77 x 11 13-683 Brush Track HB-14-20-075 Bolt, - 20 x HNFL-14-20 Flange Whiz-Lock Nut, - 20 13-688 Brush Channel 43-041 Mount Bracket HB-14-20-250 Bolt, - 20 x 2 HNFL-14-20 Flange Whiz-Lock Nut, - 20...
  • Page 140 43-008 DRAG MAT DRAWING C-38...
  • Page 141 43-008 DRAG MAT PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-716-14-125 Bolt, 7/16 - 14 x 1-1/4 HW-716 Washer, 7/16 HNTL-716-14 Lock Nut, 7/16-14 13-751 Right Carrier Mount 19-605 Drag Mat Chain HHP-18 Bridge Pin, 1/8 19-601 Steel Drag Mat 13-752 Left Carrier Mount INSTRUCTIONS 1.

  • Page 142: Box Grader

    34-191 BOX GRADER DRAWING C-40...
  • Page 143 34-191 BOX GRADER PARTS LIST REF# PART# DESCRIPTION QUANTITY 34-221 Lift Assembly 34-220 Right Pivot Bracket 33-086 Bushing 34-217 Break Up Bar HB-38-16-125 Bolt, - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 34-218 Cutter Blade HB-12-13-200 Bolt -13 x 2 HNTL-12-13 Lock Nut...

  • Page 144: 42-586Q Green Star Rbs Main Frame

    42-586Q GREEN STAR RBS MAIN FRAME DRAWING C-42...
  • Page 145 42-586Q GREEN STAR RBS MAIN FRAME PARTS LIST REF# PART# DESCRIPTION QUANTITY 43-155 Hitch 42-539 Lynch Pin 42-536 Spring 42-537 Spade Bolt HNTL-38-16 Lock Nut - 16 42-576 Spring Tower HB-38-16-275 Bolt - 16 x 2 HNTL-38-16 Lock Nut - 16 42-577 Frame HB-38-16-250...

  • Page 146: Green Star Rbs Roller

    42-581 GREEN STAR RBS ROLLER SET (3) DRAWING C-44...
  • Page 147 42-581 GREEN STAR RBS ROLLER SET (3) PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-574 Fork 18-295 Oilite Bushing (part of 42-574) HB-38-16-150 Bolt - 16 x 1 HWL-38 Lock Washer HW-38 Washer HN-38-16 - 16 11-094 Pillow Block 42-584 Roller 42-539 Lynch Pin (part of main frame)

  • Page 148: Green Star Rbs Brush

    42-585 GREEN STAR RBS BRUSH SET (3) DRAWING C-46...
  • Page 149 42-585 GREEN STAR RBS BRUSH SET (3) PARTS LIST REF# PART# DESCRIPTION QUANTITY 42-539 Lynch Pin (part of main frame) 18-295 Oilite Bushing (part of 42-579) HSPP-516-18-075 Phillip Head Screw - 18 x 42-579 Brush Bracket 42-545 Brush Head 42-586Q Green Star RBS Main Frame ADJUSTMENTS AND OPERATION INSTRUCTIONS ADJUSTMENT...

  • Page 150: Green Star Rbs Spiker

    42-582 GREEN STAR RBS SPIKER SET (3) DRAWING C-48...
  • Page 151 42-582 GREEN STAR RBS SPIKER SET (3) DRAWING REF# PART# DESCRIPTION QUANTITY 11-094 Pillow Block HNJ-114-12 Jam Nut 1 - 12 42-583 Spiker Blade 8965-1.875 Spiker Blade Spacer (1.875") 42-554 Spiker Shaft 42-578 Spiker Cover 42-574 Fork 18-295 Oilite Bushing (part of 42-574) HB-516-18-075 Bolt...
  • Page 152 43-009 72" COCO MAT FINISHER DRAWING C-50...
  • Page 153 72" COCO MAT FINISHER PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-688 Brush Channel HB-14-20-075 Hex Bolt, - 20 x HNFL-14-20 Flange Lock Nut, - 20 43-168 Brush Mount Arm HB-14-20-075 Hex Bolt, - 20 x HNFL-14-20 Flange Lock Nut, - 20 13-683 Brush Track 13-682...

  • Page 154: Typhoon

    41-501 TYPHOON DRAWING C-52...
  • Page 155 41-501 TYPHOON PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-34-10-800 Bolt, - 10 x 8 HNTL-34-10 Lock Nut, 72-135 Castor Wheel Spacer 78-012 Tire and Wheel 18-223 Flange Bushing (part of 41-520) 41-520 Frame 29-584 Adjustment Spacer " 42-539 Lynch Pin 29-585 Adjustment Spacer, 1"...
  • Page 156 41-501 TYPHOON WIRING WIRING PARTS LIST REF# PART# DESCRIPTION QUANTITY 15-727 Switch Actuator, no light 15-728 Switch Body, On-Off-On 77-261 Circuit Breaker, 40 amp 8977 Circuit Breaker Boot U-1 300 Amp Battery (not supplied) 22-056 Cable 12-031 Battery Boot 22-065 Starter Cable 16-754 Actuator...
  • Page 157 41-501 INSTRUCTIONS READ ENGINE MANUAL PRIOR TO STARTING THIS MACHINE. Machine is shipped with NO OIL in engine. Fill Engine with oil as suggested in Engine Manual. 1. You must prime pump before starting the engine. To do so, insert garden hose in Discharge Tube and fill system to full.
  • Page 158 41-502 12V BROADCAST SPREADER DRAWING C-56...

  • Page 159: Earthway

    - 18 x 1 Hex Bolts and Whiz-Loc nuts (Ref 2) mount the Spreader (Ref 1) to the Spreader Mount (Ref 3). Tighten all hardware. SMITHCO 2. Connect to the Quick Hitch Receiver on your machine. 3. Connect the wires to the battery according to the directions given in the Earthway Spreader manual.
  • Page 160 30 days from discovery of the condition. If you need help locating an Authorized Smithco Distributor, or if you have questions regarding your warranty rights or responsibilities, you may contact us at:...
  • Page 161 This warranty does not apply to normal “wear and tear” items. Normal “Wear and Tear” includes, but is not lim- ited to, damage to seats due to wear or abrasion, worn painted surfaces, scratched decals or windows, etc. Smithco may require the return of failed parts or components in order to determine the validity of any warranty claim.

This manual is also suitable for:

1fx1001

Table of Contents