Hisense WFQP8014EVM User's Operation Manual page 27

SWITCHING ON THE WASHING MACHINE
Use the power cord to connect the washing machine to power mains, and connect the washing
machine to water supply.
Press the (1) ON/OFF/RESET button to switch on the washing machine (figures 1 and 2).
1
LOADING THE WASHING MACHINE
Open the washing machine door by pulling the handle towards you (figure 1).
Insert the laundry into the drum (after making sure the drum is empty) (figure 2).
Make sure that no garment is stuck between the door and the rubber gasket. Close the washing
machine door (figure 3).
1
Do not overload the drum! See PROGRAMME TABLE and observe your nominal load as indicated
on the rating plate.
If the washing machine drum is too full, the laundry will not be washed as thoroughly.
1
2
2
3
27