Power On Delay; Led; Background - Sharp TLM5200 Operation Manual

Menu operations
Note
• The availability of Multi Screen modes depending on the
video signal is as follows.
Input Video
Mode Signal
S-VIDEO NTSC
VIDEO
PAL
Computer1 480i
Computer2
576i
N/A: Not Available
• "Status" and "Position" may not be selected depending
on the input signal.
• Depending on the number of monitors and/or the input
signal, a distributor for the input signal (commercially
available) is required. For details, refer to the "SETUP
MANUAL".

Power On Delay

You can delay the screen display after the monitor is
turned on. The period can be set up to 100 seconds
in units of 1 second. When this function is activated,
the POWER indicator flashes (at approx. 1 second
interval) in orange. This function is disabled when 0
is specified.

LED

Specifies whether to light the indicators (POWER,
TIMER, and OPC).
Selectable items
On
Off
Note
• Even if "LED" is set to "Off", the POWER indicator lights
red in standby mode.
• When backlight and/or temperature problems occur, the
TIMER indicator fl ashes red, even if "LED" is set to "Off".
Selecting the background image

(Background)

Selectable items
Blue
None
44
3x1 4x1 3x3 4x4
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A
N/A
Description
According to the setting,
the indicators light up.
The indicators do not
light up.
Description
Blue screen
Black screen