Multi Screen; Status; Position; H-Bezel - Sharp LCD Monitor User Manual

Menu operations

Multi Screen

You can align 2, 3, 4, 9, or 16 monitors and integrate
them into a single large screen to display.
Enlarged views of separated images are displayed
in each monitor.
Selectable
items

Status

Sets the number of screen splits used
for the enlargement.

Position

Specify the split screen to be
displayed when this function is used.

H-Bezel

Sets the frame width of the display

V-Bezel

when this function is used.

H-Position

Adjust the horizontal position of the
enlarged screen.

V-Position

Adjust the vertical position of the
enlarged screen.

Reset

Resets all adjustment items to factory
preset values.
Original
image
2 monitors (2x1)
1−1 2−1
3 monitors (3x1)
1−1 2−1 3−1
4 monitors (4x1)
1−1 2−1 3−1 4−1
4 monitors (2x2)
1−1 2−1
1−2 2−2
9 monitors (3x3)
1−1 2−1 3−1
1−2 2−2 3−2
1−3 2−3 3−3
16 monitors (4x4)
1−1 2−1 3−1 4−1
1−2 2−2 3−2 4−2
1−3 2−3 3−3 4−3
1−4 2−4 3−4 4−4
44
Description
Note
• The availability of Multi Screen modes depending on the
video signal is as follows.
Input Video
3x1
Mode Signal
S-VIDEO NTSC N/A
VIDEO
PAL N/A
SECAM N/A
Computer1 480I
Computer2
576I
N/A: Not Available
• "Status" and "Position" may not be selected depending
on the input signal.
• Depending on the number of monitors and/or the input
signal, a distributor for the input signal (commercially
available) is required. For details, refer to the "SETUP
MANUAL".

Power On Delay

You can delay the screen display after the monitor is
turned on. The period can be set up to 100 seconds
in units of 1 second. When this function is activated,
the POWER indicator flashes (at approx. 1 second
interval) in orange. This function is disabled when 0
is specified.

LED

Specifies whether to light the indicators (POWER,
TIMER, and OPC).
Selectable items
On According to the setting,
the indicators light up.
Off The indicators do not
light up.
Note
• Even if "LED" is set to "Off", the POWER indicator lights
red in standby mode.
• When backlight and/or temperature problems occur, the
TIMER indicator fl ashes red, even if "LED" is set to "Off".
Selecting the background image

(Background)

Selectable items
Blue Blue screen
None Black screen
4x1 3x3 4x4
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A
N/A
Description
Description