Sharp MX-B401 Operation Manual page 412

(1) (2)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings Resolution
Address Review File Format
Special Modes
File
3
Quick File
The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To
change a setting, touch the appropriate key.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
THE ORIGINAL SCAN SIZE AND SEND SIZE
IMAGE TYPE
5-60), SPECIAL MODES
(1)
Internet Fax/Original
Scan Size
8½x11
2-Sided 2-Sided
Booklet
Tablet
4
• The placement orientation of the original is initially set to
left, this step is not necessary.
• The original size set in the system settings appears as the original size.
Press the [START] key.
Scanning begins.
5
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page,
go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission will take place.
If the original was placed on the document glass, replace it with the next original
6 and press the [START] key.
Repeat until all originals have been scanned.
Fax USB Mem. Scan PC Scan
Scan: Send: Auto
8½x11
Auto
200X100dpi
TIFF-F
I-Fax Manual
Reception
(page 5-57), CHANGING THE RESOLUTION
(page 5-65)
(2) (3)
OK
100% Send Size
Auto
Image Orientation
Switch to Internet fax mode and display
the image settings screen.
(1) Touch the [Internet Fax] tab.
(2) Touch the [Original] key.
(page 5-51), CHANGING THE EXPOSURE AND ORIGINAL
(page 5-59),
Check the original scan size and
placement orientation.
In order to set the orientation of the image to be sent, check the
size and orientation of the original that were set in step 1.
(1) Check the scan size.
Check if the size of the placed original is displayed. If the
displayed size is different from the size of the placed
original, set the original size.
☞
SPECIFYING THE ORIGINAL SCAN SIZE AND
SEND SIZE
(2) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
the top edge of the original is to the left, touch the
(3) Touch the [OK] key.
You will return to the screen of step 2.
. If you placed the original with the top edge to the
5-38
SCANNER/INTERNET FAX
(page 5-50), SPECIFYING
CHANGING THE FILE FORMAT
(page 5-51)
Contents
(page
key. If
key.